Benz and Bmw Tool
Model: JTC-4210
SKU: mPB001343
Please check the stock status before placing an order. Specially designed to install and remove the front oil seal of crankshaft.Applicable: BMW N40, ..
RM850.00
Model: JTC-1842
SKU: mPB001339
Please check the stock status before placing an order. Can remove even the most stubborn pins from the cylinder head, unlike the short slide hammer..
RM205.00
Model: JTC-1714
SKU: mPB001201
Please check the stock status before placing an order. Specially designed 3 holes to hold the stud on fan clutch assembly found on Mercedes Benz vehi..
RM170.00
Model: JTC-1415
SKU: mPB001223
Please check the stock status before placing an order. Pin wrench socket 3/4" drive, to secure retaining ring for ball joint replacement.• Applicable..
RM110.00
Model: JTC-1215
SKU: mPB001364
Please check the stock status before placing an order. Removal and replacement tool for metallic bushes on rear axles BMW type E36, E46.• Replacement..
RM2,400.00
Model: JTC-4720
SKU: mPB001301
Please check the stock status before placing an order. This tool is specifically designed for holding the sprocket/ chain in place when disassembli..
RM150.00
Model: JTC-4820A
SKU: mPB001293
Please check the stock status before placing an order. Change JTC-4820 # 1 to # 1A # 16 to 16A ..
RM1,750.00
Model: JTC-1853
SKU: mPB001244
Please check the stock status before placing an order. Assists when mounting wheels, especially late models with long lug bolts.• Size:M12 x 1.5• Appl..
RM95.00
Model: JTC-4242
SKU: mPB001368
Please check the stock status before placing an order. Extractor for replacement of the rear suspension mounting bushes.Replacement of the mounting bu..
RM2,400.00
Model: JTC-4059
SKU: mPB001323
Please check the stock status before placing an order. Special designed to rotate the BMW diesel engine crankshaft.Applicable：2.5D:M57N256D2 ..
RM200.00
Model: JTC-1846
SKU: mPB001260
Please check the stock status before placing an order. Sleeve for installing reverse gear piston in front cover.Assembly fixture for circlip on spring..
RM2,000.00
Model: JTC-1332
SKU: mPB001278
Please check the stock status before placing an order. Holds the camshaft in 40 degree. TDC position (left / right side)• Applications:Benz M112, M113..
RM275.00
Model: JTC-4154
SKU: mPB001230
Please check the stock status before placing an order. Special designed to disassemble and assemble the suspension nut.Use with JTC-1941.Applicable: W..
RM3,200.00
Model: JTC-1808
SKU: mPB001303
Please check the stock status before placing an order. Includes:2 blocks, swivel lock & locking pin, for setting camshaft timing.• Applicable:BMW engi..
RM1,200.00
Model: JTC-4906
SKU: pPB001313
Please check the stock status before placing an order. Used to align the camshaft• Applicable：BMW (N53/N54)3..
RM550.00