Undercar Series
Model: JTC-1918
SKU: mPB001052
Please check the stock status before placing an order. For earless-type clamps.• A sturdy, low-cost tool. Works on earless-type clamps including thos..
RM90.00
Model: JTC-3523
SKU: mPB001162
Please check the stock status before placing an order. Prevents over or under torquing.• Serves as both a core remover and installer.• Prevents premat..
RM55.00
Model: JTC-4663
SKU: mPB001136
Please check the stock status before placing an order. Special design to hold opening the spring clamp and replace the exhaust.• Total length: 300mm; ..
RM140.00
Model: JTC-5630
SKU: pPB001159
Please check the stock status before placing an order. To portect the wheel rims from damage.• Total: 2pcs..
RM85.00
Model: JTC-4890
SKU: pPB001076
Please check the stock status before placing an order. Quickly & easily inserts wheel bearing races & seals without damage to race & axle housing.C..
RM200.00
Model: JTC-1014
SKU: pPB001065
Please check the stock status before placing an order.Application: SUZUKI model with 4WD.• Special cylinder design for suiting the transmission nut.• ..
RM220.00
Model: JTC-1541
SKU: mPB001127
Please check the stock status before placing an order. To clean impurities in wheel case• Contents: 1 1/2" grinding slice x 6pcs 2" g..
RM190.00
Model: JTC-J01
SKU: pPB001113
Please check the stock status before placing an order. Fits in brake caliper to push back pistons for new brake pads installation.• Patented..
RM190.00
Model: JTC-4058
SKU: mPB001169
Please check the stock status before placing an order. 3 function(check, release, inflator) all together on the press handle.Large 80mm gauge with 360..
RM320.00
Model: JTC-4151
SKU: mPB000996
Please check the stock status before placing an order. Suitable for lower wishbone diameter size is smaller than 30mm.Provided a 100Nm torque driver.A..
RM1,500.00
Model: JTC-4253
SKU: mPB001188
Please check the stock status before placing an order. Low noise pump with new type oil fueling-up gun, and the non-dripping muzzle is equipped S..
RM2,800.00
Model: JTC-4713
SKU: mPB001002
Please check the stock status before placing an order. To insert this tool in and twist 90° to pull open the sleeve, and remove the ram.․Applicable : ..
RM40.00
Model: JTC-4226
SKU: mPB000980
Please check the stock status before placing an order. Special designed for removing the injector of petrol and diesel engine.Two sizes of jaws are ch..
RM440.00
Model: JTC-1629
SKU: mPB001062
Please check the stock status before placing an order. Pulls 4 bolts front hub easily with the 10 lb slide hammer.• Heavy duty tool for rugged jobs...
RM380.00
Model: JTC-4704
SKU: mPB001102
Please check the stock status before placing an order. 22 parts from i.d Ø18mm~Ø60mm(in 2mm increment).Contents:4pcs center screws:10,12,14,16mm.Pump ..
RM8,000.00