AUTOMOTIVE
-200x200.png)
-200x200.jpg)
-200x200.jpg)
Model: JTC-2032
SKU: mPB002626
Please check the stock status before placing an order. Suitable for 16mm engine oil screw after skidded.Rethread by 17mm chaser.Then twist into 17mm s..
RM140.00
Model: JTC-4755
SKU: mPB000790
Please check the stock status before placing an order. Made of special steel to adjust or remove the twin-hole nuts.Replaceable pins and central adjus..
RM400.00
Model: JTC-5232
SKU: pPB001760
Please check the stock status before placing an order. This set enables to protect the dashboard during the cutting of the windshield joint by success..
RM220.00
Model: JTC-J606T
SKU: pPB001792
Please check the stock status before placing an order. Contents: T70, T80, T90, T100, M16, M18.3/4" Dr.Material: CR-MOLength: 61mm..
RM380.00
Model: JTC-4639
SKU: mPB002238
Please check the stock status before placing an order. Use with either a spanner or socket.• Special short length for use in a restricted space.• Ham..
RM385.00
Model: JTC-5325
SKU: pPB002686
Please check the stock status before placing an order. Capacity: 1L.Joint: 1/4" PT.Capacity: 7-8 bar.Air Consumption: 180 L/min...
RM350.00
Model: JTC-4014
SKU: mPB001761
Please check the stock status before placing an order. The adapter is used to test FUSO-6M70 diesel engine compression pressure.Original code: MH06..
RM340.00
Model: JTC-4816
SKU: mPB001068
Please check the stock status before placing an order. Extra large internal hole for European car.• Coverage with five oval-shaped holes to meet diff..
RM550.00
Model: JTC-3521
SKU: mPB002015
Please check the stock status before placing an order. Application: To magnetize lead tool slowly through the lower square opening(+).• To demagneti..
RM18.00
Model: JTC-1501
SKU: mPB000896
Please check the stock status before placing an order. This heavy duty blade is designed with a chisel edge.•1-1/4" (32mm) wide blade.7-1/2" (190mm) O..
RM28.00
Model: JTC-1505
SKU: mPB000898
Please check the stock status before placing an order. Edge type: Straight•Material: STAINLESS steel•Total length: 190mm•Edge width: 20mm..
RM39.00
Model: JTC-RC205
SKU: mPB001994
Please check the stock status before placing an order. All models are made of Middle Carbon Steel, one piece solid steel bar machining and with h..
RM2,100.00
Model: JTC-RD14
SKU: pPB002579
Please check the stock status before placing an order. • Applicable: General• Packing: 100sets..
RM90.00
Model: JTC-5917
SKU: pPB002633
Please check the stock status before placing an order. Shrink ratio：3:1Shrink temperature：150℃Operating temperature：-10℃~105℃Terminal material：CopperI..
RM105.00
Model: JTC-2019
SKU: mPB002618
Please check the stock status before placing an order. ․Screws:10mm x 5pc, 8mm x 5pc;13mm x 5pc;14mm x 5pc; 15mm x..
RM800.00