AUTOMOTIVE
Model: JTC-1257
SKU: mPB001030
Please check the stock status before placing an order...
RM210.00
Model: JTC-2508
SKU: mPB001748
Please check the stock status before placing an order. Slotted Weld Tip..
RM38.00
Model: JTC-5241
SKU: pPB001778
Please check the stock status before placing an order. Special designed to loose and tight the rear wheel nut.Both sides of pin are adjustable.Differe..
RM325.00
Model: JTC-1528-20
SKU: mPB000937
Please check the stock status before placing an order. • Using together with JTC-1005 or 1528 or 1414 or 4842A...
RM75.00
Model: JTC-BJ120
SKU: pPB001977
Please check the stock status before placing an order. Low profile design for most of industrial applications.Forging base as the strongest constructi..
RM830.00
Model: JTC-5325
SKU: pPB002686
Please check the stock status before placing an order. Capacity: 1L.Joint: 1/4" PT.Capacity: 7-8 bar.Air Consumption: 180 L/min...
RM350.00
Model: JTC-4139
SKU: mPB001814
Please check the stock status before placing an order. Size: Dr. 1/2", 8 POINTS, 38mm X 100mmLSpecial designed to tighten and loosen the injector cap...
RM150.00
Model: JTC-CP350
SKU: pPB001922
Please check the stock status before placing an order. Ram half 3/8” NPT (CP351)Hose half 3/8”NPT (CP352)..
RM198.00
Model: JTC-1832
SKU: mPB001202
Please check the stock status before placing an order. This universal tool has been designed service Mercedes Benz, Nissan Quest, Mercury Villager ..
RM165.00
Model: JTC-1550
SKU: mPB001255
Please check the stock status before placing an order. The tool is designed to remove the plastic fuel tank lid.• Applicable: BMW: MODEL 211/203 B..
RM230.00
Model: JTC-4275
SKU: mPB000989
Please check the stock status before placing an order. Universal applicationsProvide 4 adjustable removers & one high versatility puller fits nearly a..
RM515.00
Model: JTC-4297
SKU: mPB002507
Please check the stock status before placing an order. Special designed to remove the wheel locks and hubcap locks.Contents: 8pcs 1/2” Dr. special soc..
RM280.00
Model: JTC-5703
SKU: pPB002251
Please check the stock status before placing an order. Base on the thread to fix screw for installing and removing.Size:M6x1.0,M8x1.25,M10x1.25,M10x1...
RM240.00
Model: JTC-RD15
SKU: mPB002580
Please check the stock status before placing an order. • Applicable: General• Packing: 100sets..
RM90.00
Model: JTC-5116
SKU: pPB002292
Please check the stock status before placing an order. Material: Stainless steelDimension: #A straight brush length: 210mm; #B bend brush length: 220m..
RM50.00