AUTOMOTIVE
-200x200.png)
-200x200.jpg)
-200x200.jpg)
Model: JTC-4264
SKU: mPB001251
Please check the stock status before placing an order. Designed for extracting the rail pins with slide hammer from cylinder head while out of the ca..
RM350.00
Model: JTC-1405
SKU: mPB001114
Please check the stock status before placing an order. Special wider pusher design to use on 4 pistons vehicle.• Pusher width: 88mm• Applicable: BENZ..
RM330.00
Model: JTC-C603
SKU: pPB001711
Please check the stock status before placing an order. Capacity:5 ton• Bolt size:14mm φ x 73mm• Use the two hooks to pull and fix the car.• This tool..
RM920.00
Model: JTC-H615M
SKU: pPB002479
Please check the stock status before placing an order. Contents： 1pc. 500mm Ratchet Handle 1pc. 450mm Sliding “T” Bar&nbs..
RM850.00
Model: JTC-1430
SKU: mPB000644
Please check the stock status before placing an order. • For use on a wide range of OHV, OHC and CHV engines.• Not suitable for using on engines with ..
RM198.00
Model: JTC-3409
SKU: mPB002269
Please check the stock status before placing an order. Head material: CR-VPolished: Mat finishGrip material: TPR ITEMSPECLENGTHpacking34091-1/2P3..
RM121.00
Model: JTC-3024
SKU: mPB002037
Please check the stock status before placing an order. Size: #3 x 8m/m• Full length: 250mm..
RM25.00
Model: JTC-5308
SKU: pPB001144
Please check the stock status before placing an order...
RM30.00
Model: JTC-4028
SKU: mPB001340
Please check the stock status before placing an order. To remove the plate of clutch on BMW.Applicable：Most BMW cars.Size：M26 X P1.5..
RM130.00
Model: JTC-4924
SKU: pPB001249
Please check the stock status before placing an order. Special designed to replace the brake lining.Applicable：BENZ, BMW, VW, AUDI, FORD, MAZDA…etc492..
RM60.00
Model: JTC-H096B
SKU: pPB002494
Please check the stock status before placing an order. 13PC-1/4"DR. 6PT SOCKETS: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 MM8PC-1/4"DR. 6PT DEEP..
RM735.00
Model: JTC-1608
SKU: mPB000724
Please check the stock status before placing an order. Removes oil & grease seals.Two tips fit most application...
RM70.00
Model: JTC-J309H
SKU: pPB002524
Please check the stock status before placing an order. Contents: H-3,4,5,6,7,8,10,12,14mm3/8"DRMaterial: SNCM 8660LENGTH:52mm..
RM210.00
Model: JTC-4696
SKU: mPB001417
Please check the stock status before placing an order. Specially designed to fasten screws at the injection pump when replacing the toothed belt or..
RM55.00
Model: JTC-2031
SKU: mPB002625
Please check the stock status before placing an order. Suitable for 14mm engine oil screw after skidded.Rethread by 15mm chaser.Then twist into 15mm s..
RM125.00