AUTOMOTIVE
-200x200.webp)
-200x200.webp)
-200x200.webp)
Model: JTC-4617
SKU: mPB001487
Please check the stock status before placing an order. To take and plug-on of the ignition coil off with power-output stage at VW, AUDI fuel injection..
RM100.00
Model: JTC-4653
SKU: mPB001396
Please check the stock status before placing an order. Special designed to align the camshafts to proper position when adjusting and assembling. ..
RM45.00
Model: JTC-3204
SKU: mPB002211
Please check the stock status before placing an order. Special two ball design, increased the revolve angles.• Spring is to prevent the joint stuck wh..
RM150.00
Model: JTC-4297
SKU: mPB002507
Please check the stock status before placing an order. Special designed to remove the wheel locks and hubcap locks.Contents: 8pcs 1/2” Dr. special soc..
RM280.00
Model: JTC-4623
SKU: mPB002455
Please check the stock status before placing an order. Operate by 3/8" wrench.To set spark plug torque when tighten the screw.3/8" x 14mm: Φ19.6/19NM3..
RM500.00
Model: JTC-4686
SKU: mPB001428
Please check the stock status before placing an order. Specially designed for adjusting of the toothed belt at the automatic tensioning pulley.• Size:..
RM40.00
Model: JTC-1101
SKU: pPB000871
Please check the stock status before placing an order. The tool is used with 1/2″ drive tool.Spec: 89 mm/ 15 P.Application: Isuzu, Mazda, Daihatsu (Di..
RM155.00
Model: JTC-5628
SKU: pPB001495
Please check the stock status before placing an order. Special design to remove and replace the battery terminal and alternator bearing. • O..
RM65.00
Model: JTC-4727A
SKU: mPB001240
Please check the stock status before placing an order. Special tool for using on removing/installing compressor belt.Special three point design for su..
RM115.00
Model: JTC-4135
SKU: mPB001088
Please check the stock status before placing an order. Special designed to for wheel alignment with adjustable locator.Magnet diameter: 77 mmSIZE : 20..
RM95.00
Model: JTC-4713
SKU: mPB001002
Please check the stock status before placing an order. To insert this tool in and twist 90° to pull open the sleeve, and remove the ram.․Applicable : ..
RM40.00
Model: JTC-1718
SKU: mPB001452
Please check the stock status before placing an order. Use for removing and installing the top shock retaining nut on most FWD, VW and AUDI.• Fits int..
RM55.00
Model: JTC-4809
SKU: mPB000699
Please check the stock status before placing an order. Universally adjustable for toothed pulleys spaced between approximately 5mm to 85mm apart.For e..
RM130.00
Model: JTC-5825
SKU: pPB001804
Please check the stock status before placing an order. Effective anti-slide function with the triangular anti-slide pimple on the bottom.&n..
RM165.00
Model: JTC-J606H
SKU: mPB001791
Please check the stock status before placing an order. Contents: H14, H17, H19, H21, H22, H243/4" Dr.Material: CR-MOLength: 61mm..
RM400.00