Benz and Bmw Tool
Model: JTC-4264
SKU: mPB001251
Please check the stock status before placing an order. Designed for extracting the rail pins with slide hammer from cylinder head while out of the ca..
RM350.00
Model: JTC-4231A
SKU: mPB001246
Please check the stock status before placing an order. For inactive intelligent servo module (ISM) cause transmission failure actuation, also for tire..
RM2,100.00
Model: JTC-4820A
SKU: mPB001293
Please check the stock status before placing an order. Change JTC-4820 # 1 to # 1A # 16 to 16A ..
RM1,750.00
Model: JTC-4848
SKU: mPB001288
Please check the stock status before placing an order. A timing tool set which covers a large of models in the Mercedes range including Petrol and D..
RM330.00
Model: JTC-4338
SKU: mPB001248
Please check the stock status before placing an order. Special designed to replace the brake lining.Size: 1/2" DR x H11 x 90L.Applicable: BENZ, W166...
RM40.00
Model: JTC-1703
SKU: mPB001349
Please check the stock status before placing an order. Allow the technician to hold the water pump pulley in place while loosening the radiator fan. ..
RM110.00
Model: JTC-1556
SKU: mPB001372
Please check the stock status before placing an order. On car maintenance.• For replacement of the rear suspension defferential bush.• Applicable: B..
RM1,000.00
Model: JTC-4059
SKU: mPB001323
Please check the stock status before placing an order. Special designed to rotate the BMW diesel engine crankshaft.Applicable：2.5D:M57N256D2 ..
RM200.00
Model: JTC-4333
SKU: mPB001209
Please check the stock status before placing an order. Specially designed for removing the injector by slide hammer or the T bar.Applicable: BENZ M271..
RM210.00
Model: JTC-1552
SKU: mPB001217
Please check the stock status before placing an order. Removal and replacement tool for metallic bushes on rear axles.• Applicable: BENZ W164..
RM900.00
Model: JTC-1231
SKU: mPB001270
Please check the stock status before placing an order. The tool is designed to measure the oil level of transmission.• Full length:1220mm• Applicable:..
RM175.00
Model: JTC-4214
SKU: mPB001290
Please check the stock status before placing an order. Special designed to align the camshaft timing angle for correct position. Applicable: BENZ M157..
RM750.00
Model: JTC-1808
SKU: mPB001303
Please check the stock status before placing an order. Includes:2 blocks, swivel lock & locking pin, for setting camshaft timing.• Applicable:BMW engi..
RM1,200.00
Model: JTC-4239
SKU: mPB001287
Please check the stock status before placing an order. Used to hold the flywheel gear for removing and installing the crankshaft pulley centre bolt.Ap..
RM250.00
Model: JTC-1844
SKU: mPB001253
Please check the stock status before placing an order. The tool is designed to remove the plastic fuel tank lid.• Applicable:W210 ..
RM100.00