Truck Tool Series
Model: JTC-5158
SKU: pPB001851
Please check the stock status before placing an order. Designed for removing and installing the oil filter on VOLVO truck.SIZE: 1/2"DR x 107mm x 15PT...
RM200.00
Model: JTC-J616C
SKU: pPB001794
Please check the stock status before placing an order. 5PCS 107mmL Star bit:T60, T70, T80, T90, T100 4PCS 107mmL Hex bit:H17, H19, H22, H2..
RM800.00
Model: JTC-4147
SKU: mPB001777
Please check the stock status before placing an order. Special designed for replacing crankshaft oil seal.No damage to oil seal and related parts.Appl..
RM3,850.00
Model: JTC-4268
SKU: mPB001800
Please check the stock status before placing an order. Professional tool for removing the hub cap of automobile.Avoid to use this tool for the truck o..
RM275.00
Model: JTC-4105
SKU: mPB001765
Please check the stock status before placing an order. While replaces steering mechanism oil regulate the nut with tool and prevent nut from dama..
RM250.00
Model: JTC-4192
SKU: mPB001841
Please check the stock status before placing an order. To apply for SCANIA transmission clutch main shaft nut.Size: 3/4" Dr. 64mm / 4PTApplicable: SCA..
RM500.00
Model: JTC-5257
SKU: pPB001856
Please check the stock status before placing an order...
RM375.00
Model: JTC-4886
SKU: pPB001797
Please check the stock status before placing an order. To take apart the tubeless tire and rim.A：Remover × 1pc, total length：97cmB：Installer × 2pcs, t..
RM835.00
Model: JTC-5270
SKU: pPB001875
Please check the stock status before placing an order. Designed to install the front wheel hub on MAN.With bearing inside the tool for saving power.Ap..
RM1,115.00
Model: JTC-5294
SKU: pPB001767
Please check the stock status before placing an order. Designed to remove and install the oil mist filter on HINO truck.Use with 1/2” Dr. I.D.:107mm/8..
RM270.00
Model: JTC-4752
SKU: mPB001807
Please check the stock status before placing an order. Special designed to remove the truck ball joint.Jaws open: 32mmJaws deep: 91mmApplicable: 3.5T~..
RM540.00
Model: JTC-4717
SKU: mPB001833
Please check the stock status before placing an order. For VOLVO front/rear wheel axle cover.․Size:1"DR x 115mm(8 points)..
RM560.00
Model: JTC-4191
SKU: mPB001840
Please check the stock status before placing an order. To apply for SCANIA 8 speed transmission nut.Size: 3/4"Dr. x 58mm / 4PTApplicable: SCANIA bus...
RM500.00
Model: JTC-5263
SKU: pPB001868
Please check the stock status before placing an order. Designed to adjust the engine for correct position.Use with 1/2” drive wrench.Overall length: 1..
RM335.00
Model: JTC-5269
SKU: pPB001876
Please check the stock status before placing an order. Designed to remove the front wheel hub on MAN truck.Made from special steel for high tightening..
RM740.00