Benz and Bmw Tool
Model: JTC-4914
SKU: pPB001224
Please check the stock status before placing an order. Special two jaws designed to remove the ball joint quickly and use on car.Applicable : W163..
RM400.00
Model: JTC-4820A
SKU: mPB001293
Please check the stock status before placing an order. Change JTC-4820 # 1 to # 1A # 16 to 16A ..
RM1,750.00
Model: JTC-4620
SKU: mPB001371
Please check the stock status before placing an order. Special design to remove and install the front differential bush of E39 engine and ..
RM1,705.00
Model: JTC-4097
SKU: mPB001369
Please check the stock status before placing an order. Operation on carExtractor for replacement of the rear suspension mounting bushes. Replacemen..
RM2,100.00
Model: JTC-4101
SKU: mPB001216
Please check the stock status before placing an order. Removal and installation of rear rubber mounts of axle suspension.Applicable: BENZ W216, W221, ..
RM3,700.00
Model: JTC-4154
SKU: mPB001230
Please check the stock status before placing an order. Special designed to disassemble and assemble the suspension nut.Use with JTC-1941.Applicable: W..
RM3,200.00
Model: JTC-4117
SKU: mPB001316
Please check the stock status before placing an order. Special designed to located and turn the camshaft in correct TDC position.The 4117-7 holding to..
RM1,050.00
Model: JTC-1804E
SKU: mPB001212
Please check the stock status before placing an order. Used for R & R of front wheel bearing located in wheel carrier.• This tool can also be used to ..
RM1,400.00
Model: JTC-4181
SKU: mPB001282
Please check the stock status before placing an order. 1/2 Dr. x T100H Length: 78L.•Special designed for correcting the position on camshaft pulley.•A..
RM65.00
Model: JTC-1810
SKU: mPB001376
Please check the stock status before placing an order. For removing and installing the joint using with a hydraulic press.• Applicable:BMW E30, E36..
RM1,320.00
Model: JTC-4909
SKU: pPB001304
Please check the stock status before placing an order. For fixing the camshaft chain tensioner.•Applicable：BMW M60, M62 (VANOS)..
RM2,200.00
Model: JTC-1331
SKU: mPB001277
Please check the stock status before placing an order. Holds the camshaft in 40 degree. TDC position (left / right side)• Applications: Benz M111, M11..
RM100.00
Model: JTC-4266
SKU: mPB001279
Please check the stock status before placing an order. Special designed to position the camshafts in TDC position.Applicable:1.6L, V4 engine, A class ..
RM2,200.00
Model: JTC-1231
SKU: mPB001270
Please check the stock status before placing an order. The tool is designed to measure the oil level of transmission.• Full length:1220mm• Applicable:..
RM175.00
Model: JTC-4760
SKU: mPB001318
Please check the stock status before placing an order. Installing and removal of camshaft/variable camshaft timing unit.․Checking and adjustment of ti..
RM1,500.00