Benz and Bmw Tool
Model: JTC-1714
SKU: mPB001201
Please check the stock status before placing an order. Specially designed 3 holes to hold the stud on fan clutch assembly found on Mercedes Benz vehi..
RM170.00
Model: JTC-4690
SKU: mPB001274
Please check the stock status before placing an order. Designed to measure the oil level of transmission.• Applicable: BENZ truck...
RM200.00
Model: JTC-1231
SKU: mPB001270
Please check the stock status before placing an order. The tool is designed to measure the oil level of transmission.• Full length:1220mm• Applicable:..
RM175.00
Model: JTC-4915
SKU: pPB001336
Please check the stock status before placing an order. The kit designed to set the twin camshaft on petrol engine of BMW MINI.Applicable: BMW MINI COO..
RM1,100.00
Model: JTC-4162
SKU: mPB001232
Please check the stock status before placing an order. Special open end designed to remove the nut and keep away from air suspension pipe.Applicable: ..
RM60.00
Model: JTC-4692
SKU: mPB001262
Please check the stock status before placing an order. The crankshaft redial sealing ring has both a lip and a protective lip.• They can not be damage..
RM400.00
Model: JTC-1712
SKU: mPB001252
Please check the stock status before placing an order. Can remove even the most stubborn pins from the cylinder head, unlike the short slide hammer ..
RM185.00
Model: JTC-1810
SKU: mPB001376
Please check the stock status before placing an order. For removing and installing the joint using with a hydraulic press.• Applicable:BMW E30, E36..
RM1,320.00
Model: JTC-1419
SKU: mPB001373
Please check the stock status before placing an order. To extract and install the rear sub-frame and differential bush.• Applicable: BMW E46, E85. ..
RM650.00
Model: JTC-4618
SKU: mPB001320
Please check the stock status before placing an order. Special design for correcting timing to be made when servicing BMW M47, M57 diesel engines.• Ap..
RM400.00
Model: JTC-1804S
SKU: mPB001211
Please check the stock status before placing an order. Used for R & R of front wheel bearing located in wheel carrier.• This tool can also be used to ..
RM1,400.00
Model: JTC-4718A
SKU: mPB001210
Please check the stock status before placing an order. For removing adapted tight common rail injectors without having to disassemble the cylinder..
RM450.00
Model: JTC-1556
SKU: mPB001372
Please check the stock status before placing an order. On car maintenance.• For replacement of the rear suspension defferential bush.• Applicable: B..
RM1,000.00
Model: JTC-1415
SKU: mPB001223
Please check the stock status before placing an order. Pin wrench socket 3/4" drive, to secure retaining ring for ball joint replacement.• Applicable..
RM110.00
Model: JTC-1715
SKU: mPB001199
Please check the stock status before placing an order. Replaces fan clutch assembly on Mercedes Benz vehicles. Slim shaft handles let you easily work..
RM215.00