Engine Series
Model: JTC-4858
SKU: mPB000797
Please check the stock status before placing an order. Used on vehicles equipped with a NAGI, 42RLE, CVT Transmission & the 62TE Transaxle.Applicable：..
RM250.00
Model: JTC-1324
SKU: mPB000862
Please check the stock status before placing an order. Handle specially tilted for easy removal / installation of oil filter.• Size: range 80mm, 15 po..
RM105.00
Model: JTC-4240
SKU: mPB000698
Please check the stock status before placing an order. Comprehensive 8-piece tool kit to establish proper engine timing when performing major engine /..
RM3,000.00
Model: JTC-1831
SKU: mPB000760
Please check the stock status before placing an order. For use on Toyotas, Nissans and other OHC engines.This wrench is designed with grooved pins whi..
RM140.00
Model: JTC-4325
SKU: mPB000991
Please check the stock status before placing an order. By cleaning up carbon deposits from the intake system and the combustionchamber, can restore lo..
RM1,800.00
Model: JTC-4809
SKU: mPB000699
Please check the stock status before placing an order. Universally adjustable for toothed pulleys spaced between approximately 5mm to 85mm apart.For e..
RM130.00
Model: JTC-4735
SKU: mPB000847
Please check the stock status before placing an order. Rubber coated on the belt to prevent slipping.編號 Item範 圍 Range手柄長Shaft le..
RM70.00
-20230620012010-250x250.webp "Engine Stand 1000lbs Stand Enjin 1000lbs")
Model: PB003222
SKU: iPB003222
Stand enjin ialah alat yang biasa digunakan untuk membaiki enjin petrol atau diesel yang berat. Ia menggunakan struktur sokongan yang besar untuk mena..
RM230.00
Model: JTC-1343
SKU: mPB000817
Please check the stock status before placing an order. Suitable for both brake and fuel lines.Effective pinch action with rounded clamp section to pre..
RM47.00
Model: JTC-1707
SKU: mPB000802
Please check the stock status before placing an order. 1/2” Dr. 1-3/16” (30m/m) x 4” long for oil pressure sending unit on 2.0, 2.3, 2.5, 2.8, 3.0L GM..
RM80.00
Model: JTC-4722
SKU: mPB000740
Please check the stock status before placing an order. Engage the adjustable hook behind the seal.Brace the push rod against the engine head then push..
RM125.00
Model: JTC-4176
SKU: mPB000704
Please check the stock status before placing an order. Special designed to align the engine timing.Applicable: FORD: KA 1.3TDCi FIAT: ..
RM500.00
Model: JTC-4262
SKU: mPB000978
Please check the stock status before placing an order. This is the optimized version of the cleaning and milling tool set. Used with HDI engines, dies..
RM1,200.00
Model: JTC-4044
SKU: mPB000982
Please check the stock status before placing an order. Remove injector form most of KOREAN vehiclesApplicable vehicle：KIA：CARNIVAL, RIO, CAREENS, ..
RM2,930.00
Model: JTC-4194
SKU: mPB000892
Please check the stock status before placing an order. SIZE： Square type 8/10mmSpecial designed for removing the oil and transmission screws...
RM35.00