Undercar Series
Model: JTC-4058L
SKU: mPB001167
Please check the stock status before placing an order. All the function the same as JTC-4058, but with press type...
RM330.00
Model: JTC-1839
SKU: mPB001008
Please check the stock status before placing an order. The master tie rod tools easily replaces inner tie rod ends without removing the rack & pinion...
RM230.00
Model: JTC-9005
SKU: pPB001092
Please check the stock status before placing an order. Made of SCM440(CR-MO) material• Capacity 2 1/4"-3 1/2" (50mm x 75mm) • Bolt (φ12.7mm x L135mm..
RM150.00
Model: JTC-4635
SKU: mPB001182
Please check the stock status before placing an order. Waterproof by o-ring sealed.• Powered by 1"AA" battery.• Flow rates from 1 to 30L/min ..
RM1,000.00
Model: JTC-4871
SKU: mPB001014
Please check the stock status before placing an order. Special designed to perform alignment up to the point of setting center ball joint in their ..
RM230.00
Model: JTC-1142A
SKU: pPB001097
Please check the stock status before placing an order. Bearing separator 9015 Included.• Pullout the bearing with the H-type beam and bolts...
RM505.00
Model: JTC-1142P
SKU: pPB001098
Please check the stock status before placing an order. To use with JTC-1142For removing the bearing between rear drive shaft and differential.Length：6..
RM300.00
Model: JTC-1241
SKU: mPB001089
Please check the stock status before placing an order. • Before installing the new tyre, using this tool to extend the fender to make the work easier..
RM1,300.00
Model: JTC-4633
SKU: mPB001183
Please check the stock status before placing an order. With vacuum ejector to get the fresh oil from heavy tank easily. • Filling rate contr..
RM2,350.00
Model: JTC-4274
SKU: mPB001001
Please check the stock status before placing an order. High capacity of max. load: 26,000Nm.Max. working stroke:317mm.Suitable to work with air impact..
RM5,600.00
Model: JTC-4642
SKU: mPB001037
Please check the stock status before placing an order. • For splitting track-rod ends, anti-roll bar mountings, ball joints, etc...
RM180.00
Model: PB003220
SKU: kPB003220
Jack ialah binaan besi menjadikannya kuat dan kukuh. Reka bentuk profil rendah bermakna ia adalah apa yang anda perlukan untuk beban yang lebih rendah..
RM370.00
Model: JTC-5307
SKU: pPB001143
Please check the stock status before placing an order...
RM30.00
Model: JTC-1014
SKU: pPB001065
Please check the stock status before placing an order.Application: SUZUKI model with 4WD.• Special cylinder design for suiting the transmission nut.• ..
RM220.00
Model: JTC-4705
SKU: mPB001103
Please check the stock status before placing an order. Using together with JTC-4704.․Special design for using on bush without hold or ball joint..
RM750.00