AUTOMOTIVE
-200x200.webp)
-200x200.webp)
-200x200.webp)
Model: JTC-8P104
SKU: pPB001685
Please check the stock status before placing an order. Install under the model 8P102.This tool helps operator flexible use model 8P102...
RM120.00
Model: JTC-5283
SKU: pPB001845
Please check the stock status before placing an order. Designed to install new oil seal onto crankshaft more easier and safty.Put the tool above the o..
RM450.00
Model: JTC-4801
SKU: mPB001617
Please check the stock status before placing an order. Total length : 85mm ; O.D. : φ 26mm• The valve core puller is adjustable to fit the different v..
RM200.00
Model: JTC-4068
SKU: mPB001787
Please check the stock status before placing an order. For pulling-off wet cylinder sleeves on passenger cars or commercial vehicle.Applicable: W..
RM1,700.00
Model: JTC-1802
SKU: mPB001060
Please check the stock status before placing an order. Simply secure shaft through opening in adapter to remove the half shaft from CV joints on mos..
RM320.00
Model: JTC-US1180
SKU: mPB001905
Please check the stock status before placing an order. Capacity: 3/4 ton• Height rang: 1400~2065mm• Base size: φ305mm• Controlled by foot..
RM725.00
Model: JTC-4856
SKU: mPB001106
Please check the stock status before placing an order. This master set allows you to build your own custom bushing driver. Select the required size..
RM1,500.00
Model: JTC-4679
SKU: mPB001406
Please check the stock status before placing an order. Special designed to reset the timing position on diesel engine with fuel pump.• Applicable: Al..
RM800.00
Model: JTC-9000
SKU: pPB001091
Please check the stock status before placing an order. Made of SCM440(CR-MO) material• Capacity 1 1/4"-2 1/4" (30mm x 50mm) • Bolt (φ9.5mm x L125mm x..
RM121.00
Model: JTC-C303
SKU: pPB001691
Please check the stock status before placing an order. Capacity: 3 tonMax. open: 35mmThe width of tooth: 40mmSpecial design to pull from the position..
RM405.00
Model: JTC-4023
SKU: mPB000714
Please check the stock status before placing an order. Special designed to remove and install oil filter on D5 engine.3/8" DR. x 6 points.Applicable：X..
RM190.00
Model: JTC-4173
SKU: mPB000682
Please check the stock status before placing an order. Special designed to align the engine timing on GM vehicles.Applicable:GM Antara, Chevrolet Capt..
RM200.00
Out Of Stock
Model: PB808
SKU: mPB003211
Stand enjin ialah alat yang biasa digunakan untuk membaiki enjin petrol atau diesel yang berat. Ia menggunakan struktur sokongan yang besar untuk mena..
RM250.00
Model: JTC-4849
SKU: mPB000672
Please check the stock status before placing an order. • Engine Camshaft Sprocket Locking Device Updated timing belt replacement procedures for the en..
RM420.00