AUTOMOTIVE
Model: JTC-4647
SKU: mPB001445
Please check the stock status before placing an order. Special puller designed for pulling camshaft pulley wheels. • Applicable: 4 & 6 cylind..
RM360.00
Model: JTC-RD43
SKU: mPB002601
Please check the stock status before placing an order. • Applicable: MITSUBISHI Bumper• Packing: 100sets..
RM95.00
Model: JTC-2019
SKU: mPB002618
Please check the stock status before placing an order. ․Screws:10mm x 5pc, 8mm x 5pc;13mm x 5pc;14mm x 5pc; 15mm x..
RM800.00
Model: JTC-5639
SKU: pPB002339
Please check the stock status before placing an order. The drawer size suitable for all JTC K serious tool sets.• All drawers with quick lock systems..
RM1,650.00
Model: JTC-3719
SKU: mPB002210
Please check the stock status before placing an order. Spring-stiffened joint. Stays in position when reaching for fasteners. Substantial time-savings..
RM16.00
Model: JTC-446060
SKU: mPB002530
Please check the stock status before placing an order. • Material: SNCM 8660, 1/2"DR. ITEMSPECDia.LENGTHPacking446060T-60256010..
RM32.00
Model: JTC-4728
SKU: mPB001226
Please check the stock status before placing an order. To remove and install front lower control arm ball joint with the special C clamp.Using on..
RM650.00
Model: JTC-C601
SKU: pPB001708
Please check the stock status before placing an order. Capacity:5 ton• Single-way pull operation.• Serrate length:120mm• The special puller design use..
RM530.00
Model: JTC-HB510
SKU: pPB001949
Please check the stock status before placing an order. Capacity:10 ton (Thread type)Include:01 Two-speed hydraulic hand pump02 Jack hose, 5 feet03 10 ..
RM2,200.00
Model: JTC-5282
SKU: pPB001821
Please check the stock status before placing an order. Remove the lid of axle on BPW 6.5~9 tons with JTC-5275 before using this tool.Specially designe..
RM375.00
Model: JTC-1914
SKU: mPB001018
Please check the stock status before placing an order. Special steel for removing the ball pivots on steering.•Jaw open: 17mm..
RM195.00
Model: JTC-3722
SKU: mPB002277
Please check the stock status before placing an order. Steel ranks with 16 side-on clips hold sockets tightly without ratting.• Sockets are easily re..
RM13.00
Model: JTC-4760
SKU: mPB001318
Please check the stock status before placing an order. Installing and removal of camshaft/variable camshaft timing unit.․Checking and adjustment of ti..
RM1,500.00
Model: JTC-3304
SKU: mPB002499
Please check the stock status before placing an order. • Thin wall deep impact sockets are designed to allow easy access to recessed wheel nuts wher..
RM116.00
Model: JTC-4015
SKU: mPB001762
Please check the stock status before placing an order. The adapter used to test FUSO-6M60 diesel engine compression pressure.Original code:MH063384..
RM350.00