AUTOMOTIVE
-200x200.webp)
-200x200.webp)
-200x200.webp)
Model: JTC-1804C
SKU: mPB001213
Please check the stock status before placing an order. Used for R & R of front wheel bearing located in wheel carrier.• This tool can also be used to..
RM1,400.00
Model: JTC-4096
SKU: mPB001370
Please check the stock status before placing an order. Operation on carExtractor for replacement of the rear suspension mounting bushes. Replacement ..
RM4,096.00
Model: JTC-1042
SKU: pPB001672
Please check the stock status before placing an order. Test the battery in seconds.• The number of balls floating indicates battery condition...
RM11.00
Model: JTC-4164
SKU: mPB001112
Please check the stock status before placing an order. Removal and installation of rear rubber mounts of axle suspension.On car maintenance. Do not ne..
RM600.00
Model: JTC-4647
SKU: mPB001445
Please check the stock status before placing an order. Special puller designed for pulling camshaft pulley wheels. • Applicable: 4 & 6 cylind..
RM360.00
Model: JTC-3025
SKU: mPB002653
Please check the stock status before placing an order. • Full length: 600mm.• Special steel design for clutch and fixed in suitable place...
RM45.00
Model: JTC-1706
SKU: mPB000801
Please check the stock status before placing an order. 1/2” Dr. 1-1/16” (27m/m) x 3-1/2” long for oil pressure sending unit on 2.0, 2.3, 2.5, 2.8, 3.0..
RM80.00
Model: JTC-4654
SKU: mPB001402
Please check the stock status before placing an order. Special designed to align the camshafts at TDC position when adjusting and assembling. ..
RM310.00
Model: JTC-4217
SKU: mPB000641
Please check the stock status before placing an order. Aluminum alloy body, the operation is more lightweight and durable.Clamping range: 30~115mmMax...
RM1,100.00
Model: JTC-1803
SKU: mPB000788
Please check the stock status before placing an order. Thompson & Ford C111, C2 power steering pumps found on Ford, GM & Chrysler Vehicles.A disconnec..
RM200.00
Model: JTC-5129
SKU: pPB002278
Please check the stock status before placing an order. Contents: Pin Punch:φ4mm Cape Chisel: 5mm Cold Chisel: 12mm Center Punch:φ4mm Taper P..
RM65.00
Model: JTC-4862
SKU: mPB001444
Please check the stock status before placing an order. Special designed to remove the water pump.Loosen the exhaust pipe and starter catalytic convert..
RM600.00
Model: JTC-5063
SKU: pPB002321
Please check the stock status before placing an order. Suitable for JTC-5021.• For trash can or paper case.• Size: 340 x 200 x 101mm...
RM120.00
Model: JTC-AJ120
SKU: pPB001973
Please check the stock status before placing an order. Low profile design for most of industrial applications.Forging base as the strongest constructi..
RM1,090.00
Model: JTC-4716
SKU: mPB001832
Please check the stock status before placing an order. Applicable:To apply for stripping of SCANIA front wheel truck tractor...
RM450.00