Undercar Series
Model: JTC-3926
SKU: mPB001158
Please check the stock status before placing an order. Steel constructed tool deep threaded head for positive sealing of all snap-in type passenger ca..
RM55.00
Model: JTC-1329
SKU: pPB001055
Please check the stock status before placing an order. Designed for easliy cutting the stainless clamp.• Avoid hurting C.V. Boot• Width:Under 10mm• Th..
RM170.00
Model: JTC-4055
SKU: mPB001107
Please check the stock status before placing an order. Specially designed sliding groove for adjusting the position to work easily.To push down the wi..
RM600.00
Model: JTC-1037
SKU: pPB001781
Please check the stock status before placing an order. Special designed for the removal and installation of press fit parts, such as all joints, uni..
RM700.00
Model: JTC-9000
SKU: pPB001091
Please check the stock status before placing an order. Made of SCM440(CR-MO) material• Capacity 1 1/4"-2 1/4" (30mm x 50mm) • Bolt (φ9.5mm x L125mm x..
RM121.00
Model: JTC-4253
SKU: mPB001188
Please check the stock status before placing an order. Low noise pump with new type oil fueling-up gun, and the non-dripping muzzle is equipped S..
RM2,800.00
Out Of Stock
Model: PB003218
SKU: mPB003218
Jack ialah binaan besi menjadikannya kuat dan kukuh. Reka bentuk profil rendah bermakna ia adalah apa yang anda perlukan untuk beban yang lebih rendah..
RM255.00
Model: JTC-1610A
SKU: mPB001077
Please check the stock status before placing an order. A great tool used to replace front wheel bearing without removing the steering knuckle & str..
RM620.00
Model: PB003220
SKU: kPB003220
Jack ialah binaan besi menjadikannya kuat dan kukuh. Reka bentuk profil rendah bermakna ia adalah apa yang anda perlukan untuk beban yang lebih rendah..
RM370.00
Model: JTC-F0412
SKU: pPB001016
Please check the stock status before placing an order. Tempered drop forged steel one piece construction for long & rough usage.• 15/16"(24mm) Fork, ..
RM70.00
Model: JTC-4661
SKU: mPB001024
Please check the stock status before placing an order. Adjustable size for your convenient to fit different vehicle. • Jaw opening: 20mm ..
RM280.00
Model: JTC-1843
SKU: mPB001079
Please check the stock status before placing an order. Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly wit..
RM798.00
Model: JTC-4633
SKU: mPB001183
Please check the stock status before placing an order. With vacuum ejector to get the fresh oil from heavy tank easily. • Filling rate contr..
RM2,350.00
Model: JTC-4158
SKU: mPB001057
Please check the stock status before placing an order. Specially designed to make and remove the fixing point on the nut of drive axle.2pcs in a set. ..
RM100.00
Model: JTC-3523
SKU: mPB001162
Please check the stock status before placing an order. Prevents over or under torquing.• Serves as both a core remover and installer.• Prevents premat..
RM55.00