Engine Series
Model: JTC-1403
SKU: mPB000883
Please check the stock status before placing an order. Specification: 79mm / 15P• Application: Mitsubishi, Honda, Nissan, Toyota, Suzuki• Use with 1/2..
RM45.00
Model: JTC-1208A
SKU: pPB000809
Please check the stock status before placing an order. Finger tip "position lock" to keep hose clamps spread open.• Convenient for replacement of lowe..
RM95.00
Model: JTC-4027
SKU: mPB000738
Please check the stock status before placing an order. This tool enable cups to be installed smoothly without scratching or damage the o-ring in the c..
RM480.00
Model: JTC-1225
SKU: mPB000939
Please check the stock status before placing an order. 3-1/2” gauge with dual readings of 0-145 psi and 0-1000 kpa. Also a low pressure 2-1/2” gauge..
RM2,000.00
Model: JTC-1606
SKU: mPB000798
Please check the stock status before placing an order. 1/2” Dr. 7/8” (22m/m) x 90mm long, 7mm slot for oxygen sensor on Japanese cars, Ford, GM, Chrys..
RM44.00
Model: JTC-4857
SKU: mPB000796
Please check the stock status before placing an order. Use in conjunction with factory repair literature to get correct fluid level measurements.Appli..
RM270.00
Model: JTC-1528-20
SKU: mPB000937
Please check the stock status before placing an order. • Using together with JTC-1005 or 1528 or 1414 or 4842A...
RM75.00
Model: JTC-1252
SKU: mPB000652
Please check the stock status before placing an order. • Full length: 160mm• Designed to remove the valve collet quickly and easily.• The body is with..
RM110.00
Model: JTC-1408
SKU: mPB000739
Please check the stock status before placing an order. Suitable for removing the o-ring of engine balance shaft.The special socket will remove the spe..
RM85.00
Model: JTC-1430
SKU: mPB000644
Please check the stock status before placing an order. • For use on a wide range of OHV, OHC and CHV engines.• Not suitable for using on engines with ..
RM198.00
Model: JTC-1346A
SKU: mPB000821
Please check the stock status before placing an order. Special patented design to keep the clamp always equal standing for locking the hose tightly.Wi..
RM130.00
Model: JTC-4767
SKU: mPB000668
Please check the stock status before placing an order. Complete range of tension lever and wrench for changing the cam belt on most petrol and diesel ..
RM400.00
Model: JTC-1007
SKU: pPB000902
Please check the stock status before placing an order. Provides a fast and easy way to locate noises in engines or bearings and other moving parts.• A..
RM95.00
Model: JTC-1901
SKU: mPB000761
Please check the stock status before placing an order. Ideal for removing and assembling and type of grooved pulley for V-type belt.Ideal for alternat..
RM138.00
Model: JTC-4212
SKU: mPB000803
Please check the stock status before placing an order. Special designed to install and remove the special hose clamp on TOYOTA, and LEXUS water hose c..
RM200.00