Engine Series
Model: JTC-4279
SKU: mPB000804
Please check the stock status before placing an order. Special 3 clamps design for any type hose clamp. Use with 14mm wrench or 1/4” drive bar. Max ca..
RM110.00
Model: JTC-4774
SKU: mPB000743
Please check the stock status before placing an order. Special designed to install the cam seal in 4& 6 cylinders.Applicable: MAZDA, NISSAN, TOYOTA, L..
RM105.00
Out Of Stock
Model: PB530
SKU: kPB003206
Satu benda yang penting bagi sesiapa yang bekerja dengan mengangkat kenderaan dan menanggalkan atau memasang transmisi, kotak gear atau apa-apa lagi y..
RM550.00
Model: JTC-4061
SKU: mPB000971
Please check the stock status before placing an order. Universal copper gaskets with 15 different size combinations are suitable for most of popu..
RM400.00
Model: JTC-4027
SKU: mPB000738
Please check the stock status before placing an order. This tool enable cups to be installed smoothly without scratching or damage the o-ring in the c..
RM480.00
Model: JTC-4944
SKU: pPB000656
Please check the stock status before placing an order.Special designed for using on all engines with overhead valves.Valve springs will not be bended ..
RM390.00
Model: JTC-1504
SKU: mPB000897
Please check the stock status before placing an order. Edge type: Straight•Material: STAINLESS steel•Total length: 180mm•Edge width: 15mm..
RM39.00
Model: JTC-4703
SKU: mPB000872
Please check the stock status before placing an order. Use with 1/2" Dr. tool.ITEMSPECAPPLICABLE110189mm/15PISUZU,MAZDA,DAIHATSU(DIESEL)470392mm/15PNI..
RM155.00
Model: JTC-1829
SKU: mPB000728
Please check the stock status before placing an order. For alignment of the cam and crankshafts. Also enables correct stallation of the camshaft with ..
RM2,100.00
Model: JTC-4765
SKU: mPB000685
Please check the stock status before placing an order. ․Installing and removal of camshaft / variable camshaft timing unit.․Checking and adjustment of..
RM1,600.00
Model: JTC-1359
SKU: mPB000952
Please check the stock status before placing an order. • Use with #1364 for C.V.S. system.• The kit with fittings is different from #1364...
RM605.00
Model: JTC-1506
SKU: mPB000899
Please check the stock status before placing an order. Edge type: curved.•Material: STAINLESS steel•Total length: 190mm•Edge width: 30mm..
RM44.00
Model: JTC-4010
SKU: mPB000756
Please check the stock status before placing an order. Made from special steel.Nickel-plated.For removing and mounting piston rings...
RM95.00
Model: JTC-1425
SKU: mPB000806
Please check the stock status before placing an order. Special socket for removing oxygen sensor.Contents: #1: 1/2"DR. x 29mm x 90mmL (7mm slot) ..
RM280.00
Model: JTC-4261
SKU: mPB000835
Please check the stock status before placing an order. An innovative tool for the removal and fitting of fuel gauge sender collars.Adjustable to suit ..
RM325.00