Automotive Tools
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
-200x200.webp)
Model: JTC-9000
SKU: pPB001091
Please check the stock status before placing an order. Made of SCM440(CR-MO) material• Capacity 1 1/4"-2 1/4" (30mm x 50mm) • Bolt (φ9.5mm x L125mm x..
RM121.00
Model: JTC-5212
SKU: pPB002426
Please check the stock status before placing an order. Free speed: 7200 rpm.Bolt capacity: 29 mm.Air Inlet: 1/4"Air pressure: 90~120 psi.Max torque: 1..
RM920.00
Model: JTC-4640
SKU: mPB001048
Please check the stock status before placing an order. Operated by hand or 1/2" wrench. • This tool is easily removed by sliding sideways a..
RM80.00
Model: JTC-1225E
SKU: mPB000941
Please check the stock status before placing an order. The set designed for most European car.• Pick up the joints and adapters from #1225.• Model No...
RM1,100.00
Model: JTC-4192
SKU: mPB001841
Please check the stock status before placing an order. To apply for SCANIA transmission clutch main shaft nut.Size: 3/4" Dr. 64mm / 4PTApplicable: SCA..
RM500.00
Model: JTC-1451
SKU: mPB000841
Please check the stock status before placing an order. Heavy duty designed. Remove larger filter and diesel ones.Use with 1/2” wrench...
RM205.00
Model: JTC-1317
SKU: mPB001033
Please check the stock status before placing an order. • For splitting track rod ends, anti-roll bar mountings, ball joints, etc.Item: 1317A(mm): 23B(..
RM168.00
Model: JTC-4874
SKU: mPB000983
Please check the stock status before placing an order. Flushing repeatedly, took away all the residual sludge. All you have is a renew engine.One mach..
RM5,500.00
Model: JTC-19385
SKU: mPB002022
Please check the stock status before placing an order. • Round, flexible blade, fit for hexagon headed bolts, nuts screws and hose clamp...
RM29.00
Model: JTC-5129
SKU: pPB002278
Please check the stock status before placing an order. Contents: Pin Punch:φ4mm Cape Chisel: 5mm Cold Chisel: 12mm Center Punch:φ4mm Taper P..
RM65.00
Model: JTC-RA106A
SKU: pPB001991
Please check the stock status before placing an order. All models are made of Middle Carbon Steel, one piece solid steel bar machining and with heat t..
RM601.00
Model: JTC-4197
SKU: mPB001344
Please check the stock status before placing an order. Special designed to install or replace oil pump and vacuum pump on BMW engine.Applicable: BMW N..
RM900.00
Model: JTC-5650
SKU: pPB002662
Please check the stock status before placing an order. • Automatic retracting spring coil.• Three outlets plug could reach nearest outlet 3.3ft.• JIS..
RM1,160.00
Model: JTC-5296
SKU: pPB001768
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Use with 3/4” drive wrench...
RM650.00