JTC
Model: JTC-1839
SKU: mPB001008
Please check the stock status before placing an order. The master tie rod tools easily replaces inner tie rod ends without removing the rack & pinion...
RM230.00
Model: JTC-1840
SKU: mPB001085
Please check the stock status before placing an order. With 4 pcs alignment plates.• Hydraulic function.• Suit for most car...
RM3,300.00
Model: JTC-1841
SKU: mPB000794
Please check the stock status before placing an order. For removing and installing the transmission rear clutch piston snap ring.Adjustable for most m..
RM230.00
Model: JTC-1842
SKU: mPB001339
Please check the stock status before placing an order. Can remove even the most stubborn pins from the cylinder head, unlike the short slide hammer..
RM205.00
Model: JTC-1843
SKU: mPB001079
Please check the stock status before placing an order. Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly wit..
RM798.00
Model: JTC-1844
SKU: mPB001253
Please check the stock status before placing an order. The tool is designed to remove the plastic fuel tank lid.• Applicable:W210 ..
RM100.00
Model: JTC-1845
SKU: mPB001266
Please check the stock status before placing an order. For R & R valve spring. (Cylinder head does not need to be removed)• Applicable:Models M102, M1..
RM1,300.00
Model: JTC-1846
SKU: mPB001260
Please check the stock status before placing an order. Sleeve for installing reverse gear piston in front cover.Assembly fixture for circlip on spring..
RM2,000.00
Model: JTC-1848A
SKU: mPB001265
Please check the stock status before placing an order. Rotating head enables engine to be placed in desired in working positions.• Use for BENZ, BMW, ..
RM1,800.00
Model: JTC-1850
SKU: mPB001261
Please check the stock status before placing an order. • Transmission seal assembly sleeve...
RM1,800.00
Model: JTC-1851
SKU: mPB001254
Please check the stock status before placing an order. The tool is designed to remove the plastic fuel tank lid.• Applicable: W202..
RM305.00
Model: JTC-1852
SKU: mPB001247
Please check the stock status before placing an order. For pressure spring of packing brake.• Applicable:All Mercedes models...
RM90.00
Model: JTC-1853
SKU: mPB001244
Please check the stock status before placing an order. Assists when mounting wheels, especially late models with long lug bolts.• Size:M12 x 1.5• Appl..
RM95.00
Model: JTC-1854
SKU: mPB001258
Please check the stock status before placing an order. For installing reverse gear piston in front cover. K1 & K2 Installation Sleeve• ..
RM350.00
Model: JTC-1855
SKU: mPB001827
Please check the stock status before placing an order. To apply for SCANIA front wheel compressor spacer remove / install screws.• Size: 1"DR. 28x 37m..
RM275.00