JTC
Model: JTC-4229
SKU: mPB000782
Please check the stock status before placing an order. Special designed to install and remove rear camshaft pulley which connect to the water pump on ..
RM605.00
Model: JTC-4230
SKU: mPB001418
Please check the stock status before placing an order. Specially designed to push the sliding pieces onto camshaft.Applicable: Audi A4 (08~), Q5 (09~)..
RM50.00
Model: JTC-4231A
SKU: mPB001246
Please check the stock status before placing an order. For inactive intelligent servo module (ISM) cause transmission failure actuation, also for tire..
RM2,100.00
Model: JTC-4233
SKU: mPB000649
Please check the stock status before placing an order. For overhead camshaft engines using spacer shims.This unique tool has been designed to allow fo..
RM300.00
Model: JTC-4234
SKU: mPB000712
Please check the stock status before placing an order. This comprehensive set of tools enables the correct engine timing to be made when replacing the..
RM600.00
Model: JTC-4235
SKU: mPB001317
Please check the stock status before placing an order. For checking and setting camshaft timing when installing VANOS adjustment unit on S54 engines.B..
RM1,400.00
Model: JTC-4236
SKU: mPB001168
Please check the stock status before placing an order. All the function and weight are the same as JTC-4058.Accuracy: between 30~45psi: ± 1psi, the re..
RM340.00
Model: JTC-4237
SKU: mPB001509
Please check the stock status before placing an order. Contents: 1pc LED testing light, 2pcs testing probes red & black.The probemad..
RM52.00
Model: JTC-4239
SKU: mPB001287
Please check the stock status before placing an order. Used to hold the flywheel gear for removing and installing the crankshaft pulley centre bolt.Ap..
RM250.00
Model: JTC-4240
SKU: mPB000698
Please check the stock status before placing an order. Comprehensive 8-piece tool kit to establish proper engine timing when performing major engine /..
RM3,000.00
Model: JTC-4241
SKU: mPB001326
Please check the stock status before placing an order. Special designed to install and remove the injector in N55 engine.Applicable: BMW N55 engine...
RM550.00
Model: JTC-4242
SKU: mPB001368
Please check the stock status before placing an order. Extractor for replacement of the rear suspension mounting bushes.Replacement of the mounting bu..
RM2,400.00
Model: JTC-4243
SKU: mPB001283
Please check the stock status before placing an order. Used to fix and align the camshaft in correct timing angle when replacing the timing belt.Appli..
RM1,100.00
Model: JTC-4244
SKU: mPB000718
Please check the stock status before placing an order. This comprehensive set of tools enable to correct engine timing to be madewhen replacing the ti..
RM1,000.00
Model: JTC-4245
SKU: mPB000855
Please check the stock status before placing an order. Unique "Swivel-Handle" design allows adjustable band to rotate 180 degrees, to reach tight area..
RM73.00