Volkswagen and Audi Tool
Model: JTC-4844
SKU: mPB001416
Please check the stock status before placing an order. Special groove nut socket turns the camshaft adjuster into position.Camshaft Adjusting Socket i..
RM75.00
Model: JTC-1427
SKU: mPB001453
Please check the stock status before placing an order. Special design to stop the pulley and remove the centre bolts and the V-belt pulley at the ge..
RM60.00
Model: JTC-4282
SKU: mPB001459
Please check the stock status before placing an order. Designed for removing the oil seal on VAG engine.VM number :T40195..
RM175.00
Model: JTC-4108
SKU: mPB001414
Please check the stock status before placing an order. Secure position of high pressure pump chain drive sprocket using setting tool.Used on vehicles ..
RM70.00
Model: JTC-4696
SKU: mPB001417
Please check the stock status before placing an order. Specially designed to fasten screws at the injection pump when replacing the toothed belt or..
RM55.00
Model: JTC-4743
SKU: mPB001443
Please check the stock status before placing an order. Special design for removing the camshaft pulley on diesel engine TD, TDI etc.....Applicable: VW..
RM185.00
Model: JTC-1443
SKU: mPB001405
Please check the stock status before placing an order. Suitable for timing Bosch VE injection pumps.• Includes M8, M10, and M12 adapters.• Use in conj..
RM95.00
Model: JTC-4768A
SKU: mPB001379
Please check the stock status before placing an order. ․Installing and removal of camshaft / variable camshaft timing unit.․Checking and adjustment of..
RM435.00
Model: JTC-4854
SKU: mPB001472
Please check the stock status before placing an order. Special design to remove and install the bush.Applicable: VAG series...
RM300.00
Model: JTC-4744
SKU: mPB001439
Please check the stock status before placing an order. Special design to remove the harmonic damper while simultaneously reacting against the cran..
RM2,200.00
Model: JTC-1305
SKU: mPB001476
Please check the stock status before placing an order. Applicable: VW, T4 2.0 L, 2.4L Diesel & Gasoline E oil screws• To use on the car without removi..
RM1,750.00
Model: JTC-4284
SKU: mPB001461
Please check the stock status before placing an order. Specially designed to remove crankshaft, and camshaft position sensor seals.Applicable: VAG all..
RM230.00
Model: JTC-4036
SKU: mPB001385
Please check the stock status before placing an order. Special designed to hold and align the camshaft.Applicable: Golf 1998~, Bora 1999~, Passat 1997..
RM320.00
Model: JTC-4172
SKU: mPB001389
Please check the stock status before placing an order. Specially designed tool for camshaft locking and adjusting.• Applicable: VAG 2.7/3.0 TDi V6, a..
RM700.00
Model: JTC-4188
SKU: mPB001488
Please check the stock status before placing an order. This tool is used for removing the valve springs of VAG cars.Applicable:4 cylinder 1.8L T..
RM550.00