Volkswagen and Audi Tool
Model: JTC-1562
SKU: mPB001458
Please check the stock status before placing an order. Specially designed for fixing the rear wheel axle screws.• Applicable: VW, AUDI.• Length: 88mm..
RM90.00
Model: JTC-4768A
SKU: mPB001379
Please check the stock status before placing an order. ․Installing and removal of camshaft / variable camshaft timing unit.․Checking and adjustment of..
RM435.00
Model: JTC-4686
SKU: mPB001428
Please check the stock status before placing an order. Specially designed for adjusting of the toothed belt at the automatic tensioning pulley.• Size:..
RM40.00
Model: JTC-4862
SKU: mPB001444
Please check the stock status before placing an order. Special designed to remove the water pump.Loosen the exhaust pipe and starter catalytic convert..
RM600.00
Model: JTC-4087
SKU: mPB001383
Please check the stock status before placing an order. A complete set for alignment, adjustment the camshaft, replacement the timing chain and etc…..
RM1,250.00
Model: JTC-4847
SKU: mPB001380
Please check the stock status before placing an order. With camshaft tools, chain tensioner retainer, locking pins and tensioner bolt.• For 2.0 FSI pe..
RM400.00
Model: JTC-4745
SKU: mPB001440
Please check the stock status before placing an order. Special design to remove the front pulley from the crankshaft.․Applicable:VW,AUDI 4 and 5 cylin..
RM200.00
Model: JTC-4283
SKU: mPB001460
Please check the stock status before placing an order. Designed to remove camshaft oil seal.Applicable: VW LUPO1.4, NEW POLO 1.4VM number :T10018..
RM205.00
Model: JTC-4282
SKU: mPB001459
Please check the stock status before placing an order. Designed for removing the oil seal on VAG engine.VM number :T40195..
RM175.00
Model: JTC-4286
SKU: mPB001462
Please check the stock status before placing an order. Designed to remove front crankshaft pulley seal at the vibration damper.Applicable: VW &am..
RM280.00
Model: JTC-4112
SKU: mPB001421
Please check the stock status before placing an order. Specially designed to remove fuel tank lid for diesel and petrol cars.• Applicable: VW, AUDI,..
RM275.00
Model: JTC-4710
SKU: mPB001447
Please check the stock status before placing an order. Special design tool to renew crankshaft sealing flange.Applicable:16v,1.4,1.6 engine of VW, AUD..
RM1,150.00
Model: JTC-1547
SKU: mPB001391
Please check the stock status before placing an order. Special design to lock the CRANKSHAFT on VW-AUDI, SEAT, SKODA,2.0 TDI ENGINE...
RM75.00
Model: JTC-1326
SKU: mPB001432
Please check the stock status before placing an order. The 1/2" drive in the tools handle enables an extension of the tool by a ratchet.•Easy lossenin..
RM143.00
Model: JTC-4330
SKU: mPB001388
Please check the stock status before placing an order. Special designed set for alignment camshaft locking and adjusting.VM number: 1-T20102, 2-T10050..
RM400.00