Engine Series
Model: JTC-1608
SKU: mPB000724
Please check the stock status before placing an order. Removes oil & grease seals.Two tips fit most application...
RM70.00
Model: JTC-4699
SKU: mPB000763
Please check the stock status before placing an order. Special designed to replace the harmonic balancer pulley which will turn when you try to remove..
RM355.00
Model: JTC-1506
SKU: mPB000899
Please check the stock status before placing an order. Edge type: curved.•Material: STAINLESS steel•Total length: 190mm•Edge width: 30mm..
RM44.00
Model: JTC-4002
SKU: mPB000727
Please check the stock status before placing an order. Special designed to align the engine camshaft and crankshaft position, and correct into the sid..
RM1,600.00
Model: JTC-1706
SKU: mPB000801
Please check the stock status before placing an order. 1/2” Dr. 1-1/16” (27m/m) x 3-1/2” long for oil pressure sending unit on 2.0, 2.3, 2.5, 2.8, 3.0..
RM80.00
Model: JTC-4703
SKU: mPB000872
Please check the stock status before placing an order. Use with 1/2" Dr. tool.ITEMSPECAPPLICABLE110189mm/15PISUZU,MAZDA,DAIHATSU(DIESEL)470392mm/15PNI..
RM155.00
Model: JTC-1820
SKU: mPB000947
Please check the stock status before placing an order. This kit includes: Repairable Metal Vacuum Pump, Reservoir Jar, Transfer Lid, Storage Lid, 4 le..
RM480.00
Model: JTC-4722
SKU: mPB000740
Please check the stock status before placing an order. Engage the adjustable hook behind the seal.Brace the push rod against the engine head then push..
RM125.00
Model: JTC-4683
SKU: mPB000962
Please check the stock status before placing an order. For testing fuel pump carburetor and transmission check auto with 2~4pcs carburetors.• Contents..
RM950.00
Model: JTC-4136
SKU: mPB000968
Please check the stock status before placing an order. Essential for reintroduction of fuel into fuel pump following maintenance such as fitting a n..
RM400.00
Model: JTC-4251
SKU: mPB000942
Please check the stock status before placing an order. For accurate and reliable power steering analysis.Determines if trouble is in the front suspens..
RM935.00
Model: JTC-4042
SKU: mPB000832
Please check the stock status before placing an order. This fuel filter wrench is required to remove and install the fuel filter cap.Suitable for PEUG..
RM190.00
Model: JTC-4776
SKU: mPB000959
Please check the stock status before placing an order. ․To measure rapidly and effectively the amount of fuel that every injector returns to the d..
RM340.00
Model: JTC-4245
SKU: mPB000855
Please check the stock status before placing an order. Unique "Swivel-Handle" design allows adjustable band to rotate 180 degrees, to reach tight area..
RM73.00
Model: JTC-4128
SKU: mPB000713
Please check the stock status before placing an order. To align the camshaft and crankshaft timing position.Includes auxiliary wrench of camshaft and ..
RM800.00