Engine Series
Model: JTC-1423
SKU: mPB000751
Please check the stock status before placing an order. Range: 2"~7"(51~178mm)• Stone size: 100 x 10 x 8 (3pcs)• Collar prevents stone breakage.• Sleev..
RM171.00
Model: JTC-4278
SKU: mPB000783
Please check the stock status before placing an order. Special designed to fit any ribbed pulley.Suitable for crankshafts, alternators, air conditioni..
RM350.00
Model: JTC-4142
SKU: mPB000781
Please check the stock status before placing an order. Special designed to remove most of belt pulleys.With setting screws M6, M8 3pcs of each.The mo..
RM385.00
Model: JTC-4272
SKU: mPB000863
Please check the stock status before placing an order. This tool is designed for cutting oil filter before recycle it.Two bearing designed for saving ..
RM600.00
Model: JTC-1510
SKU: mPB000785
Please check the stock status before placing an order. Designed to hold the camshaft pulley stationary while loosening and tightening the center shaft..
RM320.00
Model: JTC-4044
SKU: mPB000982
Please check the stock status before placing an order. Remove injector form most of KOREAN vehiclesApplicable vehicle：KIA：CARNIVAL, RIO, CAREENS, ..
RM2,930.00
Model: JTC-1520
SKU: mPB000944
Please check the stock status before placing an order. Enables technician to test exhaust back pressure through oxygen sensor.• Oxygen sensor adapters..
RM400.00
Model: JTC-4706
SKU: mPB000870
Please check the stock status before placing an order. To remove oil filter and drain fuel from the filter.․Be sure to clean the o-ring surface before..
RM180.00
Model: JTC-1904T
SKU: mPB000647
Please check the stock status before placing an order. • For overhead camshaft engines using spacer shims.• This unique tool has been designed to allo..
RM275.00
Model: JTC-4023
SKU: mPB000714
Please check the stock status before placing an order. Special designed to remove and install oil filter on D5 engine.3/8" DR. x 6 points.Applicable：X..
RM190.00
Model: JTC-4866I
SKU: mPB000671
Please check the stock status before placing an order. Specially designed for locking the injection pump sprocket.Applicable: Clio, Megane, Laguna, Ka..
RM100.00
Model: JTC-4917S
SKU: pPB000770
Please check the stock status before placing an order. Special ribe and pentagon sockets for removing some special screws on vehicle. Such as engine h..
RM300.00
Model: JTC-1543
SKU: mPB000805
Please check the stock status before placing an order. To remove the screw with sensor lineContents: 1/2" DR. X 28mm(12PT X 78L) 1/2" DR..
RM220.00
Model: JTC-1243
SKU: mPB000659
Please check the stock status before placing an order. • This model of remover is designed to remove the deep seated valve seal.• Maximum:23φ• Maximum..
RM231.00
Model: JTC-4867
SKU: mPB000658
Please check the stock status before placing an order. All the descriptions are the same as JTC-4613.Change the magnet to the clamp for fixing on ever..
RM280.00