Engine Series
Model: JTC-4800
SKU: mPB000840
Please check the stock status before placing an order. Special designed to remove and install the oil filter easily and quickly.With pull spring to ma..
RM140.00
Model: JTC-4703
SKU: mPB000872
Please check the stock status before placing an order. Use with 1/2" Dr. tool.ITEMSPECAPPLICABLE110189mm/15PISUZU,MAZDA,DAIHATSU(DIESEL)470392mm/15PNI..
RM155.00
Model: JTC-1606
SKU: mPB000798
Please check the stock status before placing an order. 1/2” Dr. 7/8” (22m/m) x 90mm long, 7mm slot for oxygen sensor on Japanese cars, Ford, GM, Chrys..
RM44.00
Model: JTC-4250
SKU: mPB000943
Please check the stock status before placing an order. Set contains two gauges assemblies for high and low pressure ranges, low side : 100psi ; high s..
RM935.00
Model: JTC-1812
SKU: mPB000807
Please check the stock status before placing an order. For removal of hose clamp on fuel, oil and water hose.Hose clamp with flexible 600mm wire.Conve..
RM200.00
Model: JTC-4765
SKU: mPB000685
Please check the stock status before placing an order. ․Installing and removal of camshaft / variable camshaft timing unit.․Checking and adjustment of..
RM1,600.00
Model: JTC-4136
SKU: mPB000968
Please check the stock status before placing an order. Essential for reintroduction of fuel into fuel pump following maintenance such as fitting a n..
RM400.00
Model: JTC-4078
SKU: mPB000894
Please check the stock status before placing an order. Break gasket seals on engine sumps, transmissions or any difficult to separate gasket join..
RM240.00
Model: JTC-4041
SKU: mPB000831
Please check the stock status before placing an order. This fuel filter wrench is required to remove and install the fuel filter cap.Suitable for PEUG..
RM105.00
Model: JTC-4295
SKU: mPB000810
Please check the stock status before placing an order. Special angle jaws designed for most kinds of hose clamp.Finger tip “position lock” to keep hos..
RM150.00
Model: JTC-4240
SKU: mPB000698
Please check the stock status before placing an order. Comprehensive 8-piece tool kit to establish proper engine timing when performing major engine /..
RM3,000.00
Model: JTC-4272
SKU: mPB000863
Please check the stock status before placing an order. This tool is designed for cutting oil filter before recycle it.Two bearing designed for saving ..
RM600.00
Model: JTC-4052
SKU: mPB000973
Please check the stock status before placing an order. Designed to pull out the broken head glow plug on the engine.5pcs outside holder jaw size：φ2.7x..
RM650.00
Model: JTC-1841
SKU: mPB000794
Please check the stock status before placing an order. For removing and installing the transmission rear clutch piston snap ring.Adjustable for most m..
RM230.00