Engine Series
Model: JTC-4246
SKU: mPB000856
Please check the stock status before placing an order. Unique "Swivel-Handle" design allows adjustable band to rotate 180 degrees, to reach tight area..
RM74.00
Model: JTC-4084
SKU: mPB000737
Please check the stock status before placing an order. Special designed set of tools for installing the new belw onto the pulley.Applicable: Ford, MAZ..
RM190.00
Model: JTC-4912
SKU: pPB000967
Please check the stock status before placing an order. Diameter：3.9 mm•Field of View：1 cm ~ 6 cm•Housing：Steel•Light Source：71.5 ~ 112.5 mcd*3 LED•Len..
RM400.00
Model: JTC-1426
SKU: mPB000933
Please check the stock status before placing an order. It intends and designed for car maintenance/repair technicians to locate the abnormal noise ..
RM1,900.00
Model: JTC-1243
SKU: mPB000659
Please check the stock status before placing an order. • This model of remover is designed to remove the deep seated valve seal.• Maximum:23φ• Maximum..
RM231.00
Model: JTC-4929
SKU: pPB000679
Please check the stock status before placing an order. Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster ..
RM460.00
Model: JTC-4013
SKU: mPB000792
Please check the stock status before placing an order. This tool is designed to hold the crankshaft pulley while loosening or tightening the centre sc..
RM270.00
Model: JTC-1513
SKU: mPB000762
Please check the stock status before placing an order. Break loose the crank shaft pulley / harmonic balancer bolt. Designed to properly secure the pu..
RM260.00
Model: JTC-4167
SKU: mPB000733
Please check the stock status before placing an order. Special designed to fix crankshaft pulley when releasing / tightening central bolt.Applicable: ..
RM200.00
Model: JTC-4262
SKU: mPB000978
Please check the stock status before placing an order. This is the optimized version of the cleaning and milling tool set. Used with HDI engines, dies..
RM1,200.00
Model: JTC-1721
SKU: mPB000793
Please check the stock status before placing an order. Adjustable legs fit most cars & trucks for replacement of transmission rear clutch piston snap ..
RM396.00
Model: JTC-1617
SKU: mPB000925
Please check the stock status before placing an order. • Use to clean threads in spark plug...
RM40.00
Model: JTC-1238
SKU: mPB000637
Please check the stock status before placing an order. Easy of use, operated by one person only.• Recessed pocket on valve pusher allows replacement ..
RM594.00
Model: JTC-1101
SKU: pPB000871
Please check the stock status before placing an order. The tool is used with 1/2″ drive tool.Spec: 89 mm/ 15 P.Application: Isuzu, Mazda, Daihatsu (Di..
RM155.00
Model: JTC-1425
SKU: mPB000806
Please check the stock status before placing an order. Special socket for removing oxygen sensor.Contents: #1: 1/2"DR. x 29mm x 90mmL (7mm slot) ..
RM280.00