Truck Tool Series
Model: JTC-4887
SKU: pPB001798
Please check the stock status before placing an order. To release the gap of tire edge and rim.Total length : 116cm (before pull out)..
RM590.00
Model: JTC-4877
SKU: mPB001803
Please check the stock status before placing an order. Full length : G4877A (220mm) / 4877B (250mm)Designed to adjust brakes on most cars and light tr..
RM80.00
Model: JTC-5292
SKU: pPB001837
Please check the stock status before placing an order. Special 2 external studs designed to remove and install the front spring washer.Use with 27mm w..
RM70.00
Model: JTC-4014
SKU: mPB001761
Please check the stock status before placing an order. The adapter is used to test FUSO-6M70 diesel engine compression pressure.Original code: MH06..
RM340.00
Model: JTC-J606H
SKU: mPB001791
Please check the stock status before placing an order. Contents: H14, H17, H19, H21, H22, H243/4" Dr.Material: CR-MOLength: 61mm..
RM400.00
Model: JTC-J606E
SKU: pPB001793
Please check the stock status before placing an order. Contents: E18, E20, E22, E24, 12PT ..
RM500.00
Model: JTC-4147
SKU: mPB001777
Please check the stock status before placing an order. Special designed for replacing crankshaft oil seal.No damage to oil seal and related parts.Appl..
RM3,850.00
Model: JTC-5246
SKU: pPB001782
Please check the stock status before placing an order. Designed for all Japanese truck dismantling front and rear axles.Use with 46mm wrench.Size: φ 2..
RM990.00
Model: JTC-5240
SKU: pPB001812
Please check the stock status before placing an order. Special designed for replacing the brake disc and brake caliper on Knorr-Bremse brake system.Al..
RM3,450.00
Model: JTC-5271
SKU: pPB001872
Please check the stock status before placing an order. Designed to remove the transmission nut on MAN trucksSize: 3/4" DR x 53.5mm / 4PTOverall length..
RM340.00
Model: JTC-5266
SKU: pPB001869
Please check the stock status before placing an order. Designed for accurate rotating of the engine for valve setting or othermaintenance and service ..
RM300.00
Model: JTC-5299
SKU: pPB001815
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Any extensive slipping is a..
RM620.00
Model: JTC-4752
SKU: mPB001807
Please check the stock status before placing an order. Special designed to remove the truck ball joint.Jaws open: 32mmJaws deep: 91mmApplicable: 3.5T~..
RM540.00
Model: JTC-4192
SKU: mPB001841
Please check the stock status before placing an order. To apply for SCANIA transmission clutch main shaft nut.Size: 3/4" Dr. 64mm / 4PTApplicable: SCA..
RM500.00
Model: JTC-1560
SKU: mPB001830
Please check the stock status before placing an order. To remove the front axles plastic cover with 27mm HEXAGON SOCKET.• Size: 1"DR. x 80mm (8 points..
RM405.00