Truck Tool Series
Model: JTC-4115
SKU: mPB001788
Please check the stock status before placing an order. To remove and install split pin by way of hydraulic pressure.Applicable: Truck of European mode..
RM3,500.00
Model: JTC-5158
SKU: pPB001851
Please check the stock status before placing an order. Designed for removing and installing the oil filter on VOLVO truck.SIZE: 1/2"DR x 107mm x 15PT...
RM200.00
Model: JTC-1912
SKU: mPB001795
Please check the stock status before placing an order. Tool removes and installs to return springs on most drum breaks.• Socket end removes spring f..
RM55.00
Model: JTC-5285
SKU: pPB001843
Please check the stock status before placing an order. Designed to rotate the crankshaft when correct the timing of engine.Use with 1/2” drive wrench...
RM175.00
Model: JTC-5152
SKU: pPB001835
Please check the stock status before placing an order. Specially designed to fix bearing while removing or installing the truck nut.Use the air wrench..
RM535.00
Model: JTC-4149
SKU: mPB001772
Please check the stock status before placing an order. Special designed for installing the crankshaft front oil seal without damage.Applicable: HINO t..
RM410.00
Model: JTC-5151
SKU: pPB001834
Please check the stock status before placing an order. Special designed to fix bearing while removing or installing the truck nut.Use the air wrench o..
RM560.00
Model: JTC-4068
SKU: mPB001787
Please check the stock status before placing an order. For pulling-off wet cylinder sleeves on passenger cars or commercial vehicle.Applicable: W..
RM1,700.00
Model: JTC-4105
SKU: mPB001765
Please check the stock status before placing an order. While replaces steering mechanism oil regulate the nut with tool and prevent nut from dama..
RM250.00
Model: JTC-1561
SKU: mPB001831
Please check the stock status before placing an order. Special designed for dismantling and assembling the rear axle nut.• Applicable: SCANIA• 1" Dr...
RM450.00
Model: JTC-5267
SKU: pPB001865
Please check the stock status before placing an order. Six side drive SW60.Special designed for removing and installing the drive axle nuts.Made from ..
RM1,350.00
Model: JTC-5249
SKU: pPB001836
Please check the stock status before placing an order. Designed to remove the upper cover of king pin on VOLVO truck.Size: 3/4" DR x 80mm/ 6PTOverall ..
RM500.00
Model: JTC-4818
SKU: mPB001786
Please check the stock status before placing an order. Material :Aluminum alloy (A356)• 3.5 inch dial gauge reading 0-600 bar also reading 0-8700 lbs..
RM1,600.00
Model: JTC-4830
SKU: mPB001813
Please check the stock status before placing an order. Applicable: SCANIA truck & bus use• Special designed female adapter for radiator when purge & r..
RM185.00
Model: JTC-5274
SKU: pPB001870
Please check the stock status before placing an order. Designed for removing the installing the oil filter on MAN truck.Use with 1/2” drive wrench.Siz..
RM260.00