Truck Tool Series
Model: JTC-4752
SKU: mPB001807
Please check the stock status before placing an order. Special designed to remove the truck ball joint.Jaws open: 32mmJaws deep: 91mmApplicable: 3.5T~..
RM540.00
Model: JTC-J606T
SKU: pPB001792
Please check the stock status before placing an order. Contents: T70, T80, T90, T100, M16, M18.3/4" Dr.Material: CR-MOLength: 61mm..
RM380.00
Model: JTC-5242
SKU: pPB001871
Please check the stock status before placing an order. Designed for removing and replacing truck position sensor. Use with 1/2” drive wrench.Over..
RM100.00
Model: JTC-5158
SKU: pPB001851
Please check the stock status before placing an order. Designed for removing and installing the oil filter on VOLVO truck.SIZE: 1/2"DR x 107mm x 15PT...
RM200.00
Model: JTC-5261
SKU: pPB001862
Please check the stock status before placing an order. Special 6 teeth designed to remove the differential rear nut.Made from special steel for high t..
RM640.00
Model: JTC-5241
SKU: pPB001778
Please check the stock status before placing an order. Special designed to loose and tight the rear wheel nut.Both sides of pin are adjustable.Differe..
RM325.00
Model: JTC-4017
SKU: mPB001764
Please check the stock status before placing an order. Special designed to remove the full air system of FUSO vehicles.Original code：MC889860, MC88986..
RM600.00
Model: JTC-J606E
SKU: pPB001793
Please check the stock status before placing an order. Contents: E18, E20, E22, E24, 12PT ..
RM500.00
Model: JTC-5269
SKU: pPB001876
Please check the stock status before placing an order. Designed to remove the front wheel hub on MAN truck.Made from special steel for high tightening..
RM740.00
Model: JTC-4877
SKU: mPB001803
Please check the stock status before placing an order. Full length : G4877A (220mm) / 4877B (250mm)Designed to adjust brakes on most cars and light tr..
RM80.00
Model: JTC-5277
SKU: pPB001825
Please check the stock status before placing an order. Certain stop through ring shaped bearing areaUse with 32mm wrench.Applicable: HALDEX ..
RM640.00
Model: JTC-5256
SKU: pPB001861
Please check the stock status before placing an order. Use with 32mm wrench.Special designed for removing and installing the differential nuts.Made fr..
RM220.00
Model: JTC-4887
SKU: pPB001798
Please check the stock status before placing an order. To release the gap of tire edge and rim.Total length : 116cm (before pull out)..
RM590.00
Model: JTC-5249
SKU: pPB001836
Please check the stock status before placing an order. Designed to remove the upper cover of king pin on VOLVO truck.Size: 3/4" DR x 80mm/ 6PTOverall ..
RM500.00
Model: JTC-5297
SKU: pPB001773
Please check the stock status before placing an order. Designed to adjust the engine for correct position.Use with 24mm wrench.Applicable: DAF: CF65, ..
RM270.00