Automotive Tools
Model: JTC-2032
SKU: mPB002626
Please check the stock status before placing an order. Suitable for 16mm engine oil screw after skidded.Rethread by 17mm chaser.Then twist into 17mm s..
RM140.00
Model: JTC-1418
SKU: mPB000706
Please check the stock status before placing an order. • Updated set now covers zetec engines found in Focus, Mondeo and Cougar from 98 on.• Also cove..
RM80.00
Model: JTC-4158
SKU: mPB001057
Please check the stock status before placing an order. Specially designed to make and remove the fixing point on the nut of drive axle.2pcs in a set. ..
RM100.00
Model: JTC-4242
SKU: mPB001368
Please check the stock status before placing an order. Extractor for replacement of the rear suspension mounting bushes.Replacement of the mounting bu..
RM2,400.00
Model: JTC-1441
SKU: mPB001500
Please check the stock status before placing an order. Fuse and Diode protection, with BUZZ function.• Testing function: DCV, ACV, DCmA, Ω, BUZZ, dB,..
RM130.00
Model: JTC-5807
SKU: pPB001151
Please check the stock status before placing an order. Hook the identity to let the ribbon through the tire, then to make the needle's way forwar..
RM250.00
Model: JTC-1843
SKU: mPB001079
Please check the stock status before placing an order. Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly wit..
RM798.00
Model: JTC-4079
SKU: mPB001042
Please check the stock status before placing an order. Special designed to remove the ball joint upper of the control arm.Use for both sides of ball j..
RM700.00
Model: JTC-4099
SKU: mPB000719
Please check the stock status before placing an order. Timing belt replacement for all variants of the Rover KV6 engine (except 190) in Rover.Applicab..
RM1,400.00
Model: JTC-1606
SKU: mPB000798
Please check the stock status before placing an order. 1/2” Dr. 7/8” (22m/m) x 90mm long, 7mm slot for oxygen sensor on Japanese cars, Ford, GM, Chrys..
RM44.00
Model: JTC-4193
SKU: mPB001842
Please check the stock status before placing an order. To apply for SCANIA transmission clutch main shaft nut.Size: 3/4"Dr. 72mm.Applicable: Scania...
RM500.00
Model: JTC-3509
SKU: mPB002019
Please check the stock status before placing an order. Material:S2Contents: 9pcs 30mmL star power bit: T20, T25,T27, T30,T40, T45, ..
RM320.00
Model: JTC-PE1012S
SKU: pPB002161
Please check the stock status before placing an order. Item: PE1012SQuantity: 6pcsSpec: 10x12, 12x14, 14x17, 17x19, 19x21, 22x24..
RM170.00
Model: JTC-2505
SKU: mPB001744
Please check the stock status before placing an order. Washer Clamp..
RM50.00
Model: JTC-1804E
SKU: mPB001212
Please check the stock status before placing an order. Used for R & R of front wheel bearing located in wheel carrier.• This tool can also be used to ..
RM1,400.00