Volkswagen and Audi Tool
Model: JTC-4881
SKU: mPB001437
Please check the stock status before placing an order. Special large clamp designed for lower water hose clamp.Max clamp capacity: 55mmLarger handle ..
RM460.00
Model: JTC-4674
SKU: mPB001394
Please check the stock status before placing an order. Special designed to set camshaft in the correct position for diesel engine.• Applicable: Polo, ..
RM185.00
Model: JTC-4862
SKU: mPB001444
Please check the stock status before placing an order. Special designed to remove the water pump.Loosen the exhaust pipe and starter catalytic convert..
RM600.00
Model: JTC-1547
SKU: mPB001391
Please check the stock status before placing an order. Special design to lock the CRANKSHAFT on VW-AUDI, SEAT, SKODA,2.0 TDI ENGINE...
RM75.00
Model: JTC-4259
SKU: mPB001420
Please check the stock status before placing an order. Designed for VAG group 1.9 TDI diesel engine for flywheel locking.Applicable: VW and SKODA 1.9 ..
RM130.00
Model: JTC-1012
SKU: pPB001467
Please check the stock status before placing an order. The tool is designed to align the bow angle.• Applicable: VW, new Passat and AUDI A3, A4, A5...
RM960.00
Model: JTC-4216
SKU: mPB001378
Please check the stock status before placing an order. For alignment camshaft locking and adjusting.Applicable: VW Polo, Golf, Beetle, Caddy, SKODA, A..
RM75.00
Model: JTC-4747
SKU: mPB001442
Please check the stock status before placing an order. Special design to counterbearing of V-belt pulley or vibrator damper when changing the timing b..
RM410.00
Model: JTC-4617
SKU: mPB001487
Please check the stock status before placing an order. To take and plug-on of the ignition coil off with power-output stage at VW, AUDI fuel injection..
RM100.00
Model: JTC-4305
SKU: mPB001471
Please check the stock status before placing an order. Specially designed for installing and removing the wheel hub bearing.Operation on car.External ..
RM3,400.00
Model: JTC-4036
SKU: mPB001385
Please check the stock status before placing an order. Special designed to hold and align the camshaft.Applicable: Golf 1998~, Bora 1999~, Passat 1997..
RM320.00
Model: JTC-1327
SKU: mPB001479
Please check the stock status before placing an order. Essential for safe, controlled removal of clamps attaching exhaust to manifold.• Special design..
RM187.00
Model: JTC-4188
SKU: mPB001488
Please check the stock status before placing an order. This tool is used for removing the valve springs of VAG cars.Applicable:4 cylinder 1.8L T..
RM550.00
Model: JTC-4282
SKU: mPB001459
Please check the stock status before placing an order. Designed for removing the oil seal on VAG engine.VM number :T40195..
RM175.00
Model: JTC-4087
SKU: mPB001383
Please check the stock status before placing an order. A complete set for alignment, adjustment the camshaft, replacement the timing chain and etc…..
RM1,250.00