Volkswagen and Audi Tool
Model: JTC-4671
SKU: mPB001425
Please check the stock status before placing an order. Special angle designed to adjust the belt tension on the free roller.• Applicable: VW. AUDI...
RM150.00
Model: JTC-4086
SKU: mPB001382
Please check the stock status before placing an order. Special designed set of tools for alignment camshaft locking, and adjusting.With a camshaft adj..
RM1,200.00
Model: JTC-1305
SKU: mPB001476
Please check the stock status before placing an order. Applicable: VW, T4 2.0 L, 2.4L Diesel & Gasoline E oil screws• To use on the car without removi..
RM1,750.00
Model: JTC-4881
SKU: mPB001437
Please check the stock status before placing an order. Special large clamp designed for lower water hose clamp.Max clamp capacity: 55mmLarger handle ..
RM460.00
Model: JTC-4931
SKU: pPB001409
Please check the stock status before placing an order. For removing and installing camshaft drive gear and eliminating play in gear train - for lockin..
RM2,550.00
Model: JTC-4686
SKU: mPB001428
Please check the stock status before placing an order. Specially designed for adjusting of the toothed belt at the automatic tensioning pulley.• Size:..
RM40.00
Model: JTC-4037
SKU: mPB001386
Please check the stock status before placing an order. Special designed to align camshafts when adjusting timing.Applicable: AUDI A6 2005~, Q5 2.0T, A..
RM520.00
Model: JTC-1328
SKU: pPB001469
Please check the stock status before placing an order. Use the special tool to press the keeper and remove the C clamp, and then pull out the keeper..
RM259.00
Model: JTC-1327
SKU: mPB001479
Please check the stock status before placing an order. Essential for safe, controlled removal of clamps attaching exhaust to manifold.• Special design..
RM187.00
Model: JTC-4653
SKU: mPB001396
Please check the stock status before placing an order. Special designed to align the camshafts to proper position when adjusting and assembling. ..
RM45.00
Model: JTC-4121
SKU: mPB001433
Please check the stock status before placing an order. Used for V6 engines, to adjust valve position and fix gear wheel of camshaft.Applicable: VW Pas..
RM175.00
Model: JTC-4664
SKU: mPB001395
Please check the stock status before placing an order. Special design to hold the chain and tensioner in position during assembling an disassembl..
RM55.00
Model: JTC-4879
SKU: mPB001466
Please check the stock status before placing an order. Removing and installing spark plug connectors.Spark plug socket remover for new beetle and cars..
RM100.00
Model: JTC-4911
SKU: pPB001423
Please check the stock status before placing an order. Specially designed wrench to remove and install the fuel pump on AUDI.•Using the wrench, turn i..
RM280.00
Model: JTC-4649
SKU: mPB001473
Please check the stock status before placing an order. Special design for replacing the rear axle mounting bushes, whilst in situ on the vehicle ..
RM400.00