Volkswagen and Audi Tool
Model: JTC-4654
SKU: mPB001402
Please check the stock status before placing an order. Special designed to align the camshafts at TDC position when adjusting and assembling. ..
RM310.00
Model: JTC-4282
SKU: mPB001459
Please check the stock status before placing an order. Designed for removing the oil seal on VAG engine.VM number :T40195..
RM175.00
Model: JTC-1525
SKU: mPB001424
Please check the stock status before placing an order. Curved design for using on the narrow space of vehicle.• Adjust angles while its two knurled po..
RM85.00
Model: JTC-4265
SKU: mPB001426
Please check the stock status before placing an order. Use with 1/2” DR wrench. Special designed for adjusting the tensioning device when changing th..
RM95.00
Model: JTC-4748
SKU: mPB001427
Please check the stock status before placing an order. ․Specially designed to loose the tensioning roller when changing the poly-V belt.․Applicable: V..
RM180.00
Model: JTC-1328
SKU: pPB001469
Please check the stock status before placing an order. Use the special tool to press the keeper and remove the C clamp, and then pull out the keeper..
RM259.00
Model: JTC-4649
SKU: mPB001473
Please check the stock status before placing an order. Special design for replacing the rear axle mounting bushes, whilst in situ on the vehicle ..
RM400.00
Model: JTC-4673
SKU: mPB001398
Please check the stock status before placing an order. Special designed to set camshaft in the correct position.• Applicable: VW.: Passat(98~04) ..
RM360.00
Model: JTC-1327
SKU: mPB001479
Please check the stock status before placing an order. Essential for safe, controlled removal of clamps attaching exhaust to manifold.• Special design..
RM187.00
Model: JTC-4034
SKU: mPB001387
Please check the stock status before placing an order. Special designed to install Hall sender screens into crankshaft adjuster when setting the ..
RM1,200.00
Model: JTC-4679
SKU: mPB001406
Please check the stock status before placing an order. Special designed to reset the timing position on diesel engine with fuel pump.• Applicable: Al..
RM800.00
Model: JTC-4141
SKU: mPB001434
Please check the stock status before placing an order. Special designed to hold the crankshaft pulley for removing and installing the crankshaft cen..
RM250.00
Model: JTC-4051
SKU: mPB001480
Please check the stock status before placing an order. Suitable for 2.0 TDI engine from VAG group.To clean the contact surface between the injector ..
RM320.00
Model: JTC-1519
SKU: pPB001411
Please check the stock status before placing an order. Special design to fix the crankshaft angle.Corrects timing adjustment...
RM60.00
Model: JTC-4216
SKU: mPB001378
Please check the stock status before placing an order. For alignment camshaft locking and adjusting.Applicable: VW Polo, Golf, Beetle, Caddy, SKODA, A..
RM75.00