Automotive Tools
Model: JTC-1507
SKU: mPB001531
Please check the stock status before placing an order. Testing range: 0.6 ~ 2.4 mm 0.020 ~ 0.100 IN..
RM20.00
Model: JTC-RD06
SKU: pPB002567
Please check the stock status before placing an order. • Applicable: Door panel• Packing: 150pcs..
RM65.00
Model: JTC-3531
SKU: mPB001732
Please check the stock status before placing an order. Range applies to 1.2mm iron plate• To fold iron plates for connecting.• Punch dia: Φ5m/m..
RM460.00
Model: JTC-1225
SKU: mPB000939
Please check the stock status before placing an order. 3-1/2” gauge with dual readings of 0-145 psi and 0-1000 kpa. Also a low pressure 2-1/2” gauge..
RM2,000.00
Model: JTC-2512
SKU: mPB001750
Please check the stock status before placing an order. Copper Gaskets..
RM83.00
Model: JTC-4141
SKU: mPB001434
Please check the stock status before placing an order. Special designed to hold the crankshaft pulley for removing and installing the crankshaft cen..
RM250.00
Model: JTC-K7092
SKU: pPB002409
Please check the stock status before placing an order. ITEM NO.CONTENTS:392508~409pcs Star Screwdriver (TamperProof): T8H, T9H,T10H, T15H, T20H, T25H,..
RM200.00
Model: JTC-5062
SKU: pPB002320
Please check the stock status before placing an order. Suitable for JTC-5021.• For hanging the wipe paper.• Size: 340 x 254mm...
RM110.00
Model: JTC-1514
SKU: mPB000860
Please check the stock status before placing an order. ITEMJAW OPENINGAPPLICABLE409563mm/14 PTTOYOTA,NISSAN151465mm/14 PTTOYOTA,NISSAN..
RM100.00
Model: JTC-K4122
SKU: mPB002369
Please check the stock status before placing an order. ITEM NO.CONTENTS:448310~3212pcs 1/2"DR.12PT.Deep Impact Socket:10,12,13,14,17,19,21,22,24,27,30..
RM450.00
Model: JTC-4024
SKU: mPB000715
Please check the stock status before placing an order. Special designed to remove and install the fuel tank lid on VOLVO XC90 diesel or petrol engine...
RM290.00
Model: JTC-4279
SKU: mPB000804
Please check the stock status before placing an order. Special 3 clamps design for any type hose clamp. Use with 14mm wrench or 1/4” drive bar. Max ca..
RM110.00
Model: JTC-PM1210
SKU: mPB001934
Please check the stock status before placing an order. Four stages of foldable & removable handle saves the handle force during operation.360˚ Rot..
RM5,655.00
Model: JTC-RC101
SKU: mPB001988
Please check the stock status before placing an order. All models are made of Middle Carbon Steel, one piece solid steel bar machining and with h..
RM695.00
Model: JTC-D20SF
SKU: pPB002674
Please check the stock status before placing an order. Made of alloy steel. Withstand pressure : 20kgf/cm2編號Item型式Type規格SizeD20SF20SF1/4"D30SF30SF3/8"..
RM24.00