Truck Tool Series
Model: JTC-4019
SKU: mPB001770
Please check the stock status before placing an order. VM number: MH063201Special Design for replacing the strainer of the filter.SIZE: 1/2 "DR x 8 po..
RM250.00
Model: JTC-4753
SKU: mPB001808
Please check the stock status before placing an order. Special designed to remove the truck ball joint.Jaws open: 39mmJaws deep: 95mmApplicable: 4ton ..
RM560.00
Model: JTC-5251
SKU: pPB001849
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Any extensive slipping is a..
RM850.00
Model: JTC-5237
SKU: pPB001873
Please check the stock status before placing an order. Designed for replacing MAN truck hub bearings and removing the old bearings essential tool.Use ..
RM2,600.00
Model: JTC-5242
SKU: pPB001871
Please check the stock status before placing an order. Designed for removing and replacing truck position sensor. Use with 1/2” drive wrench.Over..
RM100.00
Model: JTC-5246
SKU: pPB001782
Please check the stock status before placing an order. Designed for all Japanese truck dismantling front and rear axles.Use with 46mm wrench.Size: φ 2..
RM990.00
Model: JTC-4015
SKU: mPB001762
Please check the stock status before placing an order. The adapter used to test FUSO-6M60 diesel engine compression pressure.Original code：MH063384..
RM350.00
Model: JTC-5299
SKU: pPB001815
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Any extensive slipping is a..
RM620.00
Model: JTC-1352
SKU: mPB001780
Please check the stock status before placing an order. Precision dies restore threads to their original conditions.• Eliminates the need for expensiv..
RM600.00
Model: JTC-5259
SKU: pPB001860
Please check the stock status before placing an order. Designed groove socket to remove the rear axle nut.Made from special steel for high tightening ..
RM720.00
Model: JTC-5244
SKU: pPB001783
Please check the stock status before placing an order. Designed to tremove the truck wheel hub with variable sizes.Contents: Thread adapters: M18, M20..
RM3,680.00
Model: JTC-5253
SKU: pPB001857
Please check the stock status before placing an order. Use with 3/4" drive wrench.Special designed for dismantling and assembling the rear axle nut.Ma..
RM750.00
Model: JTC-4068
SKU: mPB001787
Please check the stock status before placing an order. For pulling-off wet cylinder sleeves on passenger cars or commercial vehicle.Applicable: W..
RM1,700.00
Model: JTC-1561
SKU: mPB001831
Please check the stock status before placing an order. Special designed for dismantling and assembling the rear axle nut.• Applicable: SCANIA• 1" Dr...
RM450.00
Model: JTC-5151
SKU: pPB001834
Please check the stock status before placing an order. Special designed to fix bearing while removing or installing the truck nut.Use the air wrench o..
RM560.00