Truck Tool Series
Model: JTC-5262
SKU: pPB001867
Please check the stock status before placing an order. Specially designed to adjust the engine for correct position.Use with 1/2” drive wrench, 2 oppo..
RM230.00
Model: JTC-4887
SKU: pPB001798
Please check the stock status before placing an order. To release the gap of tire edge and rim.Total length : 116cm (before pull out)..
RM590.00
Model: JTC-4751
SKU: mPB001806
Please check the stock status before placing an order. Special designed to remove the truck ball joint.Jaws open: 30mmJaws deep: 60mmApplicable: all l..
RM310.00
Model: JTC-4107
SKU: mPB001766
Please check the stock status before placing an order. To remove the wheel nut.Size: 1/2" DR x PCD 60mm x φ 8mm / 2PT.Applicable: MITSUBISHI DELICA 25..
RM220.00
Model: JTC-5276
SKU: pPB001826
Please check the stock status before placing an order.Substantial construction for drawing off firmly sitting BPW brake linage adjusters.Suitable..
RM600.00
Model: JTC-5285
SKU: pPB001843
Please check the stock status before placing an order. Designed to rotate the crankshaft when correct the timing of engine.Use with 1/2” drive wrench...
RM175.00
Model: JTC-5278
SKU: pPB001824
Please check the stock status before placing an order...
RM975.00
Model: JTC-5266
SKU: pPB001869
Please check the stock status before placing an order. Designed for accurate rotating of the engine for valve setting or othermaintenance and service ..
RM300.00
Model: JTC-1207
SKU: pPB001839
Please check the stock status before placing an order. Special 4 dots design for suiting nuts.• SIZE: 3/4”DR. x 64mm/4PT.• Application: SCANIA 310(11..
RM500.00
Model: JTC-5121
SKU: pPB001789
Please check the stock status before placing an order...
RM90.00
Model: JTC-5259
SKU: pPB001860
Please check the stock status before placing an order. Designed groove socket to remove the rear axle nut.Made from special steel for high tightening ..
RM720.00
Model: JTC-5238
SKU: pPB001874
Please check the stock status before placing an order. Designed for replacing MAN tractor hub bearings and removing the old bearings essential tool.Us..
RM2,700.00
Model: JTC-5248
SKU: pPB001850
Please check the stock status before placing an order. Special 5 teeth designed to adjust the brake caliper.Overall length: 46mmUse with 36mm wrench.M..
RM80.00
Model: JTC-4045
SKU: mPB001779
Please check the stock status before placing an order. Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts...
RM1,050.00
Model: JTC-5286
SKU: pPB001838
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Positive drive of the axle ..
RM565.00