Truck Tool Series
Model: JTC-5283
SKU: pPB001845
Please check the stock status before placing an order. Designed to install new oil seal onto crankshaft more easier and safty.Put the tool above the o..
RM450.00
Model: JTC-5262
SKU: pPB001867
Please check the stock status before placing an order. Specially designed to adjust the engine for correct position.Use with 1/2” drive wrench, 2 oppo..
RM230.00
Model: JTC-5249
SKU: pPB001836
Please check the stock status before placing an order. Designed to remove the upper cover of king pin on VOLVO truck.Size: 3/4" DR x 80mm/ 6PTOverall ..
RM500.00
Model: JTC-4107
SKU: mPB001766
Please check the stock status before placing an order. To remove the wheel nut.Size: 1/2" DR x PCD 60mm x φ 8mm / 2PT.Applicable: MITSUBISHI DELICA 25..
RM220.00
Model: JTC-4830
SKU: mPB001813
Please check the stock status before placing an order. Applicable: SCANIA truck & bus use• Special designed female adapter for radiator when purge & r..
RM185.00
Model: JTC-4192
SKU: mPB001841
Please check the stock status before placing an order. To apply for SCANIA transmission clutch main shaft nut.Size: 3/4" Dr. 64mm / 4PTApplicable: SCA..
RM500.00
Model: JTC-5270
SKU: pPB001875
Please check the stock status before placing an order. Designed to install the front wheel hub on MAN.With bearing inside the tool for saving power.Ap..
RM1,115.00
Model: JTC-4886
SKU: pPB001797
Please check the stock status before placing an order. To take apart the tubeless tire and rim.A：Remover × 1pc, total length：97cmB：Installer × 2pcs, t..
RM835.00
Model: JTC-4019
SKU: mPB001770
Please check the stock status before placing an order. VM number: MH063201Special Design for replacing the strainer of the filter.SIZE: 1/2 "DR x 8 po..
RM250.00
Model: JTC-4220
SKU: mPB001801
Please check the stock status before placing an order. Size : 3-M18x1.5, 3-M20x1.5, 3-M22x1.5.Special design to protect the wheel threads when taking ..
RM480.00
Model: JTC-5121
SKU: pPB001789
Please check the stock status before placing an order...
RM90.00
Model: JTC-5260
SKU: pPB001864
Please check the stock status before placing an order. Special designed with 6 teeth designed for removing the drive axle nut.Made from special steel ..
RM550.00
Model: JTC-5251
SKU: pPB001849
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Any extensive slipping is a..
RM850.00
Model: JTC-5267
SKU: pPB001865
Please check the stock status before placing an order. Six side drive SW60.Special designed for removing and installing the drive axle nuts.Made from ..
RM1,350.00
Model: JTC-5293
SKU: pPB001847
Please check the stock status before placing an order. Special 4 internal studs designed to install and remove the fan bearing base.Size: 3/4" DR. x 5..
RM270.00