Truck Tool Series
Model: JTC-4715
SKU: mPB001829
Please check the stock status before placing an order. To apply for SCANIA rear wheel compressor spacer removal/installing screws.․Size:1"DR. 34.5..
RM200.00
Model: JTC-4107
SKU: mPB001766
Please check the stock status before placing an order. To remove the wheel nut.Size: 1/2" DR x PCD 60mm x φ 8mm / 2PT.Applicable: MITSUBISHI DELICA 25..
RM220.00
Model: JTC-5284
SKU: pPB001844
Please check the stock status before placing an order. Designed to install the transmission oil seal easily and without causing damage.Applicable: SCA..
RM375.00
Model: JTC-5263
SKU: pPB001868
Please check the stock status before placing an order. Designed to adjust the engine for correct position.Use with 1/2” drive wrench.Overall length: 1..
RM335.00
Model: JTC-5277
SKU: pPB001825
Please check the stock status before placing an order. Certain stop through ring shaped bearing areaUse with 32mm wrench.Applicable: HALDEX ..
RM640.00
Model: JTC-5238
SKU: pPB001874
Please check the stock status before placing an order. Designed for replacing MAN tractor hub bearings and removing the old bearings essential tool.Us..
RM2,700.00
Model: JTC-4018
SKU: mPB001769
Please check the stock status before placing an order. Special designed to remove the injector of FUSO-6M60Original code：MH061071Length：345mm..
RM300.00
Model: JTC-5267
SKU: pPB001865
Please check the stock status before placing an order. Six side drive SW60.Special designed for removing and installing the drive axle nuts.Made from ..
RM1,350.00
Model: JTC-5152
SKU: pPB001835
Please check the stock status before placing an order. Specially designed to fix bearing while removing or installing the truck nut.Use the air wrench..
RM535.00
Model: JTC-4717
SKU: mPB001833
Please check the stock status before placing an order. For VOLVO front/rear wheel axle cover.․Size:1"DR x 115mm(8 points)..
RM560.00
Model: JTC-J606T
SKU: pPB001792
Please check the stock status before placing an order. Contents: T70, T80, T90, T100, M16, M18.3/4" Dr.Material: CR-MOLength: 61mm..
RM380.00
Model: JTC-5294
SKU: pPB001767
Please check the stock status before placing an order. Designed to remove and install the oil mist filter on HINO truck.Use with 1/2” Dr. I.D.:107mm/8..
RM270.00
Model: JTC-4887
SKU: pPB001798
Please check the stock status before placing an order. To release the gap of tire edge and rim.Total length : 116cm (before pull out)..
RM590.00
Model: JTC-5820
SKU: pPB001805
Please check the stock status before placing an order. Stroke : 16mm.Capacity：13mm.L×W×H：196×90×310mm.Weight：2.24 kg.Air inlet:1/4" PT.Air consumption..
RM3,500.00
Model: JTC-5260
SKU: pPB001864
Please check the stock status before placing an order. Special designed with 6 teeth designed for removing the drive axle nut.Made from special steel ..
RM550.00