Truck Tool Series
Model: JTC-4139
SKU: mPB001814
Please check the stock status before placing an order. Size: Dr. 1/2", 8 POINTS, 38mm X 100mmLSpecial designed to tighten and loosen the injector cap...
RM150.00
Model: JTC-5245
SKU: pPB001785
Please check the stock status before placing an order. Special Injector puller solution for new generation trucksApplicable: trucks with injector-Pump..
RM940.00
Model: JTC-4268
SKU: mPB001800
Please check the stock status before placing an order. Professional tool for removing the hub cap of automobile.Avoid to use this tool for the truck o..
RM275.00
Model: JTC-4756
SKU: mPB001784
Please check the stock status before placing an order. ․For removal and replacemant of the pressure nut and injector holder.․Applicable: BENZ truck, M..
RM260.00
Model: JTC-5291
SKU: pPB001852
Please check the stock status before placing an order. Designed to adjust the engine for correct position.Use with 1/2" drive wrench.Applicable: Alter..
RM310.00
Model: JTC-5268
SKU: pPB001866
Please check the stock status before placing an order. Six side drive SW60.Special robust execution designed to remove the front axle nut.Made from sp..
RM540.00
Model: JTC-1207
SKU: pPB001839
Please check the stock status before placing an order. Special 4 dots design for suiting nuts.• SIZE: 3/4”DR. x 64mm/4PT.• Application: SCANIA 310(11..
RM500.00
Model: JTC-5286
SKU: pPB001838
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Positive drive of the axle ..
RM565.00
Model: JTC-5287
SKU: pPB001816
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Use with an impact wrench o..
RM515.00
Model: JTC-5246
SKU: pPB001782
Please check the stock status before placing an order. Designed for all Japanese truck dismantling front and rear axles.Use with 46mm wrench.Size: φ 2..
RM990.00
Model: JTC-4070
SKU: mPB001810
Please check the stock status before placing an order. Use with 3/4" Dr. WrenchItem: 4070A (mm): 42mmB (mm): 80.6C (mm): 59.5..
RM1,100.00
Model: JTC-5259
SKU: pPB001860
Please check the stock status before placing an order. Designed groove socket to remove the rear axle nut.Made from special steel for high tightening ..
RM720.00
Model: JTC-1912
SKU: mPB001795
Please check the stock status before placing an order. Tool removes and installs to return springs on most drum breaks.• Socket end removes spring f..
RM55.00
Model: JTC-1517
SKU: mPB001811
Please check the stock status before placing an order. Suitable for 4,6,8mm and 6mm longer rivet.• For brake lining riveting and replacing.• Suggestio..
RM5,000.00
Model: JTC-4830
SKU: mPB001813
Please check the stock status before placing an order. Applicable: SCANIA truck & bus use• Special designed female adapter for radiator when purge & r..
RM185.00