Truck Tool Series
Model: JTC-5274
SKU: pPB001870
Please check the stock status before placing an order. Designed for removing the installing the oil filter on MAN truck.Use with 1/2” drive wrench.Siz..
RM260.00
Model: JTC-5291
SKU: pPB001852
Please check the stock status before placing an order. Designed to adjust the engine for correct position.Use with 1/2" drive wrench.Applicable: Alter..
RM310.00
Model: JTC-5248
SKU: pPB001850
Please check the stock status before placing an order. Special 5 teeth designed to adjust the brake caliper.Overall length: 46mmUse with 36mm wrench.M..
RM80.00
Model: JTC-4148
SKU: mPB001771
Please check the stock status before placing an order. Special designed for installing the crankshaft rear oil seal without damage.Applicable: HINO 15..
RM600.00
Model: JTC-1561
SKU: mPB001831
Please check the stock status before placing an order. Special designed for dismantling and assembling the rear axle nut.• Applicable: SCANIA• 1" Dr...
RM450.00
Model: JTC-5158
SKU: pPB001851
Please check the stock status before placing an order. Designed for removing and installing the oil filter on VOLVO truck.SIZE: 1/2"DR x 107mm x 15PT...
RM200.00
Model: JTC-5271
SKU: pPB001872
Please check the stock status before placing an order. Designed to remove the transmission nut on MAN trucksSize: 3/4" DR x 53.5mm / 4PTOverall length..
RM340.00
Model: JTC-5293
SKU: pPB001847
Please check the stock status before placing an order. Special 4 internal studs designed to install and remove the fan bearing base.Size: 3/4" DR. x 5..
RM270.00
Model: JTC-5244
SKU: pPB001783
Please check the stock status before placing an order. Designed to tremove the truck wheel hub with variable sizes.Contents: Thread adapters: M18, M20..
RM3,680.00
Model: JTC-4192
SKU: mPB001841
Please check the stock status before placing an order. To apply for SCANIA transmission clutch main shaft nut.Size: 3/4" Dr. 64mm / 4PTApplicable: SCA..
RM500.00
Model: JTC-5252
SKU: pPB001855
Please check the stock status before placing an order. Made from special steel and robust execution to remove the axle nut.Any extensive slipping is a..
RM850.00
Model: JTC-4147
SKU: mPB001777
Please check the stock status before placing an order. Special designed for replacing crankshaft oil seal.No damage to oil seal and related parts.Appl..
RM3,850.00
Model: JTC-4715
SKU: mPB001829
Please check the stock status before placing an order. To apply for SCANIA rear wheel compressor spacer removal/installing screws.․Size:1"DR. 34.5..
RM200.00
Model: JTC-5285
SKU: pPB001843
Please check the stock status before placing an order. Designed to rotate the crankshaft when correct the timing of engine.Use with 1/2” drive wrench...
RM175.00
Model: JTC-5249
SKU: pPB001836
Please check the stock status before placing an order. Designed to remove the upper cover of king pin on VOLVO truck.Size: 3/4" DR x 80mm/ 6PTOverall ..
RM500.00